4.7 Automatic keypad switchover
The automatic keypad switchover function serves to send telephone numbers
that begin with “*“ or “#“ as keypad signals. This function is sometimes needed
in telecommunications systems. Some telecommunications systems or switching
computers can be controlled with keypad functions. Digits entered as keypad
signals are sent to the exchange as digitally coded signals.
Initial state:
idle
Steps:
No. Description Input Display
4.8 Setting the date and time
Normally, the date and time are updated by the exchange when you start a
telephone conversation. You can make the settings manually if your exchan-
ge does not support this feature.
Initial state:
idle
Steps:
No. Description Input Display
CHANGE DATE+TIME
22.05.9988810:--
Å ‹ Ǥ‰ÏÌÓÛı
R or s R
Clear individual digits
or the complete
display
2
CHANGE DATE+TIME
22.05.9988810:53
Å ‹ Ǥ‰ÏÌÓÛı
s 0 1
Initiate
programming
1
AUTOKEYPAD§=§ON
˜*88888OK88888#·
Å ‹ Ǥ‰ÏÌÓÛı
o
Save the input3
AUTOKEYPAD§=§ON
#8=8OFF
Å ‹ Ǥ
‰ÏÌÓÛı
#
Switch over the
setting (ON or OFF)
2
AUTOKEYPAD§=§OFF
#8=8ON
Å ‹ Ǥ‰ÏÌÓÛı
s 0 0 5
Initiate
programming
1
49