Philips CD455 Answering Machine User Manual


 
Register your product and get support at CD450
www.philips.com/welcome CD455
SE450
SE455
Listen to new messages recorded on the answering machine (for CD455/SE455)
Press o on the base station to turn on the answering machine (the LED is turned on).
The outgoing message is played.
Press
p on the base station to play phone messages (the first recorded message
will be played first).
Press
s to skip the current message and play the next message.
Press
R to go back to the previous message (if pressed within 1 second of current
message playback).
Press
R to replay current message (if pressed after 1 second of current message
playback).
Press
-+ to adjust speaker volume during message playback.
Press
f to delete the current message.
Press
o again to turn off the answering machine (the LED is turned off).
Refer to your CD455/SE455 User Manual for details about the answering machine
functions.
Connect
Install
Enjoy
1
2
3
Quick start guide
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Need help?
User Manual
See the user manual that came with your phone.
Online help
www.philips.com/support
2008 ©Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner.
Printed in China
3111 285 46431
Troubleshooting
For more information, please refer to the User Manual that came with your phone.
Problem(s) Tip(s)
Signal icon flashing The handset may be out of range. Move closer to the
base station.
If the handset displays UNREGISTERED, register the
handset again.
• Handset on the
charger does not
charge
Check that the batteries are inserted correctly.
Make sure the handset is placed properly on the charger.
Batteries may be defective. Purchase new ones from
your dealer.
No display Check that the batteries are charged.
Check the power and phone connections.
• Handset does not ring • Check that the handset ringer is turned on.
Caller number is not
displayed
Service is not activated. Check your subscription with
your network provider.
Caller does not hear
me clearly
Move closer to the base station.
Move the base station at least one meter away from
any electronic appliances.