Philips CD245 Cordless Telephone User Manual


  Open as PDF
of 2
 
Switch the handset On/Off
Press and hold e key for more than 5 seconds to switch on/off the handset in idle
mode.
Keypad lock/unlock
Press and hold * key for 1 second to lock and unlock the keypad in idle mode.
Paging
1. Press p key on the base station. All the registered handsets start to ring.
2. Once retrieved, press any key on the handset to end the paging.
Listen to messages recorded on the answering machine (for CD245 only)
Press o on the base station to turn on the answering machine (the LED is turned on).
Press
o again to turn off the answering machine (the LED is turned off).
Press
> on the base station to play phone messages (the first recorded message
will be played first).
Press
r to skip the current message and play the next message.
Press
l to go back to the previous message (if pressed within 1 second of current
message playback).
Press
l to replay current message (if pressed after 1 second of current message
playback).
Press
v to adjust speaker volume during message playback.
Press
x to delete the current message.
Refer to your CD245 User Manual for details about the answering machine function.
Enjoy
3
Make a call
Dial the number (maximum 24 digits) and press r key.
OR
Press
v key to take the line and dial the number (maximum 24 digits).
Answer a call
When the phone rings, press r key.
End a call
To end a conversation, press e key.
Adjust earpiece volume
During a call, press : to select from VOLUME 1 to VOLUME 3.
Store a contact in the phonebook
1. Press m key in idle mode, scroll : to PHONEBOOK and press mOK, press
mOK to enter ADD NUMBER.
2.
ENTER NAME is displayed on the screen.
3. Enter the name of the contact (maximum 12 characters) and press
mOK.
4. Enter the number (maximum 24 digits) and press
mOK.
A validation tone is emitted.
Access the phonebook
1. Press d in idle mode and scroll : to browse the phonebook.
2. To view the details, press
p key.
Set the ring melody
1. Press m key in idle mode, scroll : to PERSONAL SET and press mOK,
press
mOK to enter HANDSET TONE, scroll : to RING MELODY and
press
mOK.
2. Scroll
: to your desired melody to play the melody.
3. Press
mOK to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
3111 285 33431
Frequently asked questions
For more information, please refer to the User Manual that came with your
phone.
Need help?
User Manual
Refer to the User Manual that came with your CD240/245.
Online help
www.philips.com/support
Problem Solution
• There’s no dialling tone! • Check the connections
• Charge the batteries
• Use the line cable provided
• Caller cannot hear me
clearly!
• Move closer to the base station
• Move the base station at least one metre away
from any electrical appliances
•
SEARCHING... is
displayed on handset and
icon is blinking!
• Move closer to the base station
• Reset your unit and restart the handset registration
• Calller number is not
displayed!
• Check your subscription with your network
operator
 previous