Filter
Top Products
12 Getting started
4 Getting started
4.1 Connect the charger
Place the charger in a central
location near the electricity socket.
Connect the power cable to their
corresponding connectors at the
back of the charger.
4.2 Install your phone
Before using the handset, the batteries
have to be installed and fully charged.
4.2.1 Install battery
Warning
Always use AAA rechargeable batteries
supplied with your unit. There could be
risk of battery leakage if you use alkaline
batteries or other battery types.
Slide out the battery cover.
Place the batteries in the correct
polarity as indicated and replace the
cover.
4.2.2 Charge battery
Warning
The handset must be charged for at least
24 hours before using it for the first time.
When the battery level becomes low, the
low battery sensor alerts you by sounding
an audible tone and blinking the battery
icon.
If the battery level becomes exceedingly
low, the phone automatically switches off
shortly after the alert and any function in
progress will not be saved.
Place the handset on the charging
cradle of the charger. A beep is
emitted if the handset is placed
correctly.
The battery icon on the display
blinks during charge.
The battery icon becomes
steady when the handset is fully
charged.
Note
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
The indoor and outdoor range of the
phone is up to 50 meters and 300 meters
respectively. When the handset moves
1
2
!
1
2
!
1
2
3