Philips CD140 Cordless Telephone User Manual


 
Getting started
13
Code Country
26 Slovenia
27 Croatia
28 Bulgaria
29 Serbia
30 Singapore
31 Indonesia
32 Malaysia
35 Australia
36 New Zealand
39 Brazil
40 Mexico
Note
Once the country is selected,
the default line settings for the
selected country will be applied
to your phone automatically.
Tip
If you chose the country in use
wrongly or would like to
change the country after the
first configuration, you can
press , , enter 4-digit PIN
code (default PIN is 0000) and
press in idle mode to its
default settings.The handset
will go back to country code
selection screen and you can
select the country code again.If
country selection is not
needed, the handset will go
back to idle screen after reset.
3.5 Register your
handset
You will need to register your
new handset or if you wish to
register the handset to a
different base unit.You can
register up to four handsets
on a single base station.
Before entering the 4-digit
PIN, press on the base unit
for around three seconds
when the base is in standby
mode.
Press ,
Enter the default or
existing 4-digit PIN code.
(Default PIN is 0000)
Press to start
registration
Note
If the PIN code you entered is
incorrect, a long beep is
emitted and the phone returns
to standby mode.
3
2
1