Filter
Top Products
3
1 Important Safety Information
Only use this product in countries where the appropriate
authorities have given their authorisation.
The CE symbol on the product certifies its conformity with the
technical guidelines concerning user safety and electro-mag-
netic compatibility valid at the time of approval; in accordance
with European directive No. 91\263\EEC.
This product complies with IP50 - according to IEC 529/
EN 60 529.
Sensitive
Electronic
Environment
Any radio-based equipment can potentially cause interference
with other equipment and can be interfered from other equip-
ment. This also applies for DECT equipment. However due to
the very low transmission power level the changes for interfer-
ence are very small. Research proves that operational DECT
phones normally don't influence electronic equipment however
some precautions must be taken into account for sensitive
electronic equipment e.g. sensitive laboratory equipment.
When DECT phones operate in straight nearness of sensitive
electronic equipment incidental influence can appear. You are
advised not to place the DECT phone on or close (less then
10cm) to this kind of equipment, even in standby mode.
Please also use the other documentation supplied with the var-
ious parts of your telephone system.
Power Supply The mains voltage of the adapter should match the local mains
voltage, this can be 110V or 220V. Check if both voltages do
match before installing the charger and adapter.