Philips 9125 Cordless Telephone User Manual


 
16
BATTERIES
Charging the Spare Battery Pack
The Spare Battery Charging Compartment is located in the base cradle. You
can use the spare battery pack to replace the current handset battery pack
right away if it becomes depleted. The spare handset battery pack is
optional, and must be purchased separately.
1 Open the battery door on top of the base cradle by lifting the latch
on top.
2 Insert the battery. The SPARE BATT CHARGING light goes on.
3 Replace the battery door. The spare battery will be charged in about
24 hours.
Replacing the Handset Battery Pack
1 Remove the battery cover by pressing on the indentation and sliding
downward.
2 Lift out the old battery pack.
3 Install the new battery pack so that the metal contacts on the
bottom of the battery are aligned with the charging contacts in the
battery compartment.
4 Replace the battery cover by sliding it on its track up over the
battery compartment until it snaps firmly in place.
5 The new battery pack must be charged before using this telephone.
Place the handset in the base and allow it to charge for 16 hours.
Your telephone might operate before that, but for best performance,
let the handset battery pack charge fully.
Charging the spare battery pack
Replacing the handset battery pack
Lucent 9125 book.L1 4/8/98, 11:25 AM16