Philips 9125 Cordless Telephone User Manual


 
15
BATTERIES
CAUTION: To reduce the risk of fire or injury to persons or damage
to the telephone, read and follow these instructions carefully.
Use only Replacement Battery 3470.
Do not dispose of the battery in a fire. The cell might explode.
Check with local codes for special disposal instructions.
Do not open or mutilate the battery. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be toxic
if swallowed.
Exercise care in handling batteries in order not to short the battery
pack with conducting materials such as rings, bracelets, and keys.
The battery pack or conductor may overheat and cause harm.
Charge the battery provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in this manual.
Make sure the battery is inserted properly so the metal contacts on
the battery are aligned with the charging contacts in the battery
compartment.
Charging the Handset Battery Pack
The batteries need charging when:
The screen displays LOW BATTERY.
The phone does not respond when you press P, and no lights
go on.
Place the handset in the base so the CHARGING light goes on. The batteries
will be fully charged in 10 hours (16 hours for first charge).
NOTE: For optimum battery performance, do not place the handset in the
base until the LOW BATT indicator lights.
Power Reserve
When you install a spare battery (purchased separately) in the base, you
can use this phone even during a power failure. If the battery in the spare
battery compartment is fully charged, you can make and receive calls for
up to five hours.
Lucent 9125 book.L1 4/8/98, 11:25 AM15