Filter
Top Products
Phone Settings 53
SmartLink 4050 Series Getting Started Guide 5 • Using the configuration menu
• Anonymous Call:
- If DISABLE is selected, full URI and name are sent to the receiver's phone when the user makes a phone
call. The URI and name of the caller are displayed on the receiver's phone.
- When Full URI is selected, it uses “Anonymous” as its display name and URI when the user makes a
phone call. It may display “Anonymous” or nothing on the receiver's phone.
- When Display Name is selected, only display name is replaced by “Anonymous” when the user makes a
phone call. It may display “Anonymous” or nothing on the receiver's phone.
• Anonymous Call Reject: Select Enable to reject anonymous calls.
• Call Forward: Enter the call forward number on the text box.
- Click No Answer to enable call forward to another number when no one answers the phone after 180s
(default). The timer can be changed from 0-600s. Refer to the section,“Timer”, to change the timer.
- Click Busy to enable call forward to another number when user is busy on the phone.
- Click Unconditional to transfer all incoming calls to another number.
• Hot Line:
- Enable or disable Hot Line
- Number: a phone number which is the destination of Hot Line
- Timeout: If user doesn't dial during the time, the phone will dial the Number automatically.
• Transfer end of Conference Call: Enable or disable the feature of transferring call after the three-way con-
ference call is ended.
• Pound Key Dial: Enable or disable Pound key Dial. Pound Key ( # ) can be defined as a <send> key.
• Miss Call Display: Enable or disable to display miss calls on the LCD.
Timer
• NTP Recycle Timer: The time interval that the IP phone synchronize with NTP server.
• Inter Digit Timer: The time interval that the IP phone waits to detect the end of DTMF digits. No more
digits are accepted after this period and the phone begins to dial.
• Originating Not Accept Timer: The time interval that the caller's phone waits to establish a call. If the
receiver fails to answer the phone during this time interval, the caller's phone will automatically disconnect.
• Incoming No Answer Timer: The time interval that the receiver's phone will ring. If the receiver fails to
answer the phone during this time interval, the phone will automatically disconnect.
• Hold Recall Timer: The time interval that the call party which is put on held by the phone recalls.
• Auto Speaker Off Timer: The time interval that the speaker phone is on before turning off automatically
(due to inactivity).