Patton electronic SL4050/B12/E Telephone User Manual


 
Setting up the VoIP SIP phone 28
SmartLink 4050 Series Getting Started Guide 2 • Installing the SmartLink SIP Phone
Anonymous Call
Enables the caller (user) to hide the name and phone number from the receiver.
1. Press .
2. Use or to select ENABLE or DISABLE
Anony Call Rej (anonymous call rejection)
Reject any anonymous incoming calls.
1. Press .
2. Use or to select ENABLE or DISABLE
Ringing Type
Select the ring tone. There are nine possible ring tones.
1. Press .
2. Use or to select ENABLE or DISABLE
Note At this point, you may press to exit the menu and press to
SAVE.. The next two sections explain how to obtain the MAC address and
firmware version.
M2~M12 Setting (Model SL4050/B12/E only)
Select the functionality of the line keys. There are four types of settings: Line / Park / One-Touch Dial / Exten-
sion.
1. Press .
2. Use or to select the functionality.
3. Press to enter the number (i.e. number of the parking area, destination of One-Touch Dial, or
the monitored extension.
Cancel
OK
Anonymous Call:
ENABLE/DISABLE
Cancel
OK
Anony Call Rej:
ENABLE/DISABLE
Cancel
OK
Ring Type:
Ringing 1/2/3/4/5/6/7/8/9
Menu
OK
Cancel
OK
M2 Setting: (M2~M12)
Line/Park/One Touch Dial/Extension