Filter
Top Products
16
Making/Answering Calls
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long distance
service. When storing a calling card access
number and/or PIN in the phonebook, a
pause is also needed (page 20).
Example: If you need to dial the line access
number “9” when making outside calls with
a PBX:
1 {9} > {PAUSE}
2 Dial the phone number.
3 π KX-TS560MX
Lift the handset to start calling.
π KX-TS580MX
Lift the handset or press {SP-PHONE}
to start calling.
Note:
≥ A 3.5 second pause is inserted each time
{PAUSE} is pressed. Repeat as needed to
create longer pauses.
Answering calls
When a call is being received, the unit rings,
the ringer indicator flashes quickly and
“
INCOMING CALL
” is displayed. You can
answer a call by simply lifting the handset.
Using the speakerphone
(Available for: KX-TS580MX)
1 {SP-PHONE}
2 When you finish talking, press
{SP-PHONE}.
Note:
≥ The ringer indicator will flash when
s a telephone number is dialed in PULSE
mode, or
s someone picks up or hangs up another
phone connected to the same phone line.
This is normal.
Adjusting the unit ringer volume
You can select the ringer volume to HIGH,
LOW or OFF. The default setting is HIGH.
OFF
HIGH
LOW
RINGER
KX-TS580MX.book Page 16 Friday, August 1, 2008 3:34 PM