Filter
Top Products
Sub-menu 1 Sub-menu 2 Settings Code
Set tel line
Set dial mode
*2
P
ulse
<To
ne>
#120 13
Set flash time
*2
, *8
900 ms
<70
0 ms>
600 ms
400 ms
300 ms
250 ms
200 ms
160 ms
110 ms
100 ms
90 ms
80 ms
#121 15
Set line mode
*2
, *9
A
<B>
#122 –
Call sharing
*
2
– <On>
O
ff
#194 15
Registration Register handset
– #130 26
Deregistration
*3
– #
131 26
Change
l
a
nguage
Display
<English>
Español
#110 12
Voice prompt
*1
,
*2
<English>
E
spañol
#112 12
Main menu: “Customer support”
Operation Code
Displaying customer support Web address. #680 –
*1 KX-TGC220 series: page 3.
*2
If you program these settings using one of the units, you do not need to program the same
item using another unit.
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
2). If you select a melody, you cannot distinguish lines by their ringers.
*6 The preset melodies in this product (“Tone 3” - “Tone 5”, “Melody 1” - “Melody 10”)
are used with permission of © 2012 Copyrights Vision Inc.
*7 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
For assistance, please visit http://www.panasonic.com/help
23
Programming
TGC2xx(en_en)_1209_ver030.pdf 23 2013/12/09 11:46:10