Filter
Top Products
Programmable Settings
For assistance, please call 1-800-211-PANA (7262). 43
Base unit Talking Caller ID
This feature must be turned on or off for
the base unit by using the handset (page
26). The default setting is ON.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Set base unit” by pressing
{V} or {^}, then press {>}.
4 Scroll to “Talking CallerID” by
pressing {V} or {^}, then press {>}.
5 Press {V} or {^} repeatedly to select
“On” or “Off”.
6 Press {Save}, then press {OFF}.
Other options
Handset key tone
You can select whether or not key tones
are heard when keys are pressed.
Includes confirmation tones and error
tones. The default setting is ON.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Key tone” by pressing {V} or
{^}, then press {>}.
4 Press {V} or {^} repeatedly to select
“On” or “Off”.
5 Press {Save}, then press {OFF}.
Re-registering the handset
If “No link to base. Move closer
to base, try again.” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
LMake sure the base unit is not being
used.
LHave the handset and base unit near
each other when re-registering the
handset.
LKX-TG5452 and KX-TG5453 only:
Confirm the extension number of the
handset which has lost its link to the
base unit by placing the handset on the
base unit or charger.
If you accidentally assign another
handset’s extension number to it, the
other extension will stop functioning.
TG5451_5452_5453.book Page 43 Friday, February 18, 2005 11:38 AM