Filter
Top Products
Preparation
14 For assistance, please visit http://www.panasonic.com/phonehelp
Panasonic battery performance
Note:
LBattery operating time may be
shortened over time depending on
usage conditions and surrounding
temperature.
LBattery power is consumed whenever
the handset is off the base unit or
charger, even when the handset is not in
use. Hence the longer you leave the
handset off the base unit or charger, the
less time you may actually talk using the
handset.
LAfter the handset is fully charged,
displaying “Charge completed”, it
may be left on the base unit or charger
without any ill effect on the battery.
LThe battery level may not be displayed
correctly after you replace the battery. In
this case, place the handset on the base
unit or charger and let charge for 7
hours.
Wall mounting for charger
(KX-TG6702 only)
1 Drive the screws (not included) into the
wall using the wall mount template as a
guide.
2 Mount the charger (A), then slide it
down (B) and to the right (C) until it is
secure.
Operation Operating time
While in use
(talking)
Up to 5 hours
While not in use
(standby)
Up to 7 days
While using the
clarity booster
feature (page 25)
Up to 3 hours
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
Wall mount template for the charger
25.4 mm
(1 inch)
TG6700.book Page 14 Monday, April 24, 2006 10:28 AM