Nortel Networks M3905 Cordless Telephone User Manual


 
Call Center Agent features
19
To Walkaway while in Not Ready
mode (Not Ready LED or LCD
indicator is on, and Not Ready is
shown on the display):
/
1. Press the Not Ready Key.
/
2. Press the Hold Key.
3. Disconnect the headset.
Note: On the Meridian SL-100, you need
to enter a walkaway code.
To return from Walkaway:
1. Connect the headset.
/
or
/
2. Press the key next to the flashing
indicator.
Note 1: If a caller disconnects before you
return from Walkaway, the Not Ready
indicator flashes. When you return from
Walkaway, you are in Not Ready mode.
Note 2: Even if you are using the optional
handset, you must disconnect the headset
to activate walkaway mode. There is not a
quick disconnect for the handset.
Note 3: On the Meridian SL-100, you are
not required to disconnect the headset for
walkaway.
Note 4: On the Meridian SL-100 a call on
hold prevents you from activating the Not
Ready Key. When you press the Not Ready
Key, an active call is terminated unless your
network administrator has enabled the
Non-immediate Cut-off feature for your
telephone.
Not Ready
Hold
In - Calls
Not Ready