Nortel Networks BCM50 2.0 Cordless Telephone User Manual


 
12 Chapter 2 Features and buttons
NN40050-108NN40050-108
3 When you hear an external dial tone, dial the external telephone number.
To make internal calls using intercom buttons:
1 Lift the handset.
2 Press an intercom button.
3 Dial the extension number.
Answer calls
When your telephone rings, and the light flashes, or an intercom or line button indicator flashes:
lift the handset.
OR
press the line or intercom button with the flashing indictor before you lift the handset.
Hold
Calls are put on hold automatically when you switch from one line to another.
While on a call, press . The indicator for the line on hold flashes.
To retrieve a held call, press the line button with the flashing indicator.
Handsfree
Your System Administrator must program the Handsfree feature to your telephone.
Press to make or answer a call.
To switch to Handsfree when you are on a handset call, press and replace the handset. Lift
the handset to switch back.
To switch to Handsfree when you are on a headset call, press . Press to switch back.
Headset
You must have a headset installed on your telephone to use this feature.
Press
to activate the headset mode. When the light is on, press a line or
intercom button to make a call.
Note: Contact your System Administrator for a list of line pool codes. When
entering a line pool access code on PRI lines, you do not hear dial tone.
Note: Contact your System Administrator for a list of extension numbers.