Filter
Top Products
Remote Annex 6300 Hardware Installation Guide
Appendix D Modem Upgrade Instructions
D-2
Disassembly Instructions
These instructions assume that you are facing the unit’s rear panel.
To disassemble the Remote Annex 6300 (see
Figure D-1):
1 Unplug the unit.
2 Disconnect all the cables.
3 Remove the screws from the side and back of the unit.
4 Slide the cover back and lift the cover vertically (see
Figure D-1).
Figure D-1. Removing the Remote Annex 6300 Cover
Screws
(17 places)