Nortel Networks 6300 Telephone User Manual


 
C-5Remote Annex 6300 Hardware Installation Guide
Appendix C Modem Carrier Card Upgrade Instructions
Assembly Instructions
To reassemble the Remote Annex 6300:
1 Lower the Remote Annex 6300’s cover onto the unit and slide it
forward (see
Figure C-3).
2 Secure the cover by installing the 17 screws back into the cover,
starting at the rear and working to the sides.
Do not over-tighten these screws.
Figure C-3. Replacing the Remote Annex 6300 Cover
Screws
(17 places)