Filter
Top Products
Remote Annex 6300 Hardware Installation Guide
Appendix C Modem Carrier Card Upgrade Instructions
C-2
Disassembly Instructions
The following instructions describe how to disassemble the Remote
Annex 6300. These instructions assume that you are facing the unit’s
rear panel. Figure C-1 illustrates the instructions.
1 Unplug the unit.
2 Disconnect all the cables.
3 Remove the screws from the side and back of the unit.
4 Slide the cover back and lift the cover vertically (see
Figure C-1).
Figure C-1. Removing the Remote Annex 6300 Cover
Screws
(17 places)