Nortel Networks 4075 Cordless Telephone User Manual


 
DECT system configuration
48
2. Press the Up or Down key to highlight the Register
option.
3. Press the Select soft key to start the registration
process.
4. Press the Up or Down key to choose one of the
following:
If the handset is subscribed to fewer than four
systems, choose Empty
OR
If the handset is already subscribed to four
systems, choose the name of the system to
overwrite.
5. Press the Select soft key, and then press the Yes
soft key if you want to overwrite a system.
The PARK prompt appears.
6. Use the Dialpad to enter the PARK code.
Attention: If more than one DECT system overlaps
in your location, you are sometimes required to
enter a PARK code (system ID). If only one DECT
system is available, make no entry, and press the
Skip soft key.
7. Press the Save soft key.
The PIN prompt appears.
8. Use the Dialpad to enter the PIN (authorisation
code).
9. Press the OK soft key.
The Network name prompt appears.
Register
Select
Empty
Select
Yes
Save
OK