Filter
Top Products
Handset accessories
226
to use Bluetooth wireless technology. For more information about
handset controls, see “Handset controls” (page 35).
To install or remove the Bluetooth wireless technology module, you must
remove the battery pack.
Installing the Bluetooth wireless technology module on your DECT
4070 or 4075 Handset
To install the Bluetooth wireless technology module on your DECT 4070
or 4075 Handset, perform the following steps:
1. Place the handset face down on a flat surface.
2. Remove the battery compartment cover and the battery.
Note: For information about removing the DECT 4027 or 4070
handset battery compartment cover, see “Installing the battery pack
(4027 and 4070 only)” (page 18).
Note: For information about removing the DECT 4075 handset
battery compartment cover, see “Removing and installing the battery
pack (4075 only)” (page 218).
3. Slide the Bluetooth wireless technology module into the compartment
as shown in Figure 28.
Note: On the DECT 4075 Handset, the Bluetooth wireless technology
compartment is oriented 90 degrees clockwise in comparison to
DECT 4070 handset.
4. Replace the cover after you reinstall the battery pack as shown in
Figure 2.
Attention: This feature is available on the DECT 4070 and 4075
Handsets only. Contact your system administrator to
determine if you can use the Bluetooth wireless technology
feature with your handset.