Filter
Top Products
Telephone settings
186
Clearing the startup image
If you do not want to use a startup image, perform the following steps:
Configuring power save
To configure how long the handset remains idle before entering an
energy-saving state, perform the following steps:
6. Perform one of the following:
Press the Show soft key to view the selected
image.
OR
Press the Select soft key to use the selected image
as your startup image.
7. Press the Clr key one or more times to return to the
idle display.
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 181).
2. Press the Up or Down key to highlight the Startup
screen option.
3. Press the Select soft key.
4. Press the Up or Down key to select the None
option.
5. Press the Clr key one or more times to return to the
idle display.
1. Open the Display menu using the steps in
“Accessing the Display settings menu” (page 181).
Show
Select
Startup screen
Select
None