Filter
Top Products
Telephone settings
175
Enabling the Vibrator
If you enable the Vibrator feature, the handset vibrates to alert you about
incoming calls. You can configure the handset to vibrate, ring, or both.
To enable the Vibrator feature, perform the following steps:
Enabling the Key sound
If you enable the Key sound feature, a sound occurs when you press a
key.
Attention: The Vibrator feature is available on the DECT 4070 and
4075 Handsets only.
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 167).
2. Press the Up or Down key to highlight the Vibrator
option.
3. Press the Select soft key.
4. Press the Up or Down key to select Off (disabled),
Vibrate then ring, or Vibrate and ring.
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Vibrator
Select
Off
Vibrate then ring
Vibrate and ring
Select