Filter
Top Products
Telephone settings
165
Viewing information
Use the status option to view information about the software release
installed on the handset, hardware version of the handset, battery charge
status, level of radio signal, and available memory.
To view status information, perform the following steps:
2. Press the Up or Down key to highlight the Reset
memory card option.
3. Press the Select soft key.
4. Press the Yes soft key.
5. Use the Dialpad to enter the current PIN code.
6. Press the OK soft key.
7. Press the Clr key one or more times to return to the
idle display.
8. Switch off the handset.
9. Switch on the handset.
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 150).
2. Press the Up or Down key to highlight the Status
option.
3. Press the Select soft key.
Reset memory card
Select
Yes
OK
Status
Select