Filter
Top Products
6
REGISTRATION
REGISTERING KONFTEL 200W WITH A BASE STATION
The Konftel 200W has to be registered with a base station before it can be used.
Note that both the base station and the Konftel 200W have to be put into registra
-
tion mode.
These are the instructions for registering with a Konftel DECT base station. If regis-
tering Konftel 200W with other makes of base station, follow the same procedure.
Please refer to your base station user guide if you are unsure.
Set the Konftel DECT base station in registration mode
Press and hold the key/LED on the base station for
at least 2 seconds until it starts to flash.
The base station is now in registration mode. Once
registration has been completed, the LED will stop flash
-
ing. If the base station does not identify a DECT phone
within 2 minutes, the registration mode will switch off
automatically.
Set the Konftel 200W in registration mode
Press the MENU key.
Select the menu “Tools” using the Up/down key.
Press OK.
Select the menu Reg using the Up/down key.
Press OK.
Select a base (1-4).
If no base station has been programmed, choose no. 1.
Numbers that are ticked are being used.
Press OK.
Select a DECT system.
Press OK.
Reg
Base 1
DECT system:
Key/LED