Hustler Turf ATZ Lawn Mower User Manual


 
ENGINE
Model Kohler
Horsepower 27
No. of Cylinders
2
Diaplacement 44.0 cu in (725 cc)
Compression Ratio
9.0:1
Max. Torque 42.7 ft lbs @ 3000 rpm
Starter 12-volt (.8 kw), solenoid shift,
positive engagement
Ignition Electronic
Charging System 12-volt, 15-amp
Fuel Unleaded gasoline, octane rating of 87 or higher
Fuel Filter Replaceable, automotive-type
Air Filter Heavy-duty air cleaner to extend the service
interval for excessive, dirty applications and improved
performance
Cooling Air cooled. Fly-wheel fan
Governor Mechanical
TRACTION DRIVE SYSTEM
Type Dual hydrostatic. Individual pumps power two
direct-drive wheel motors. Hydrostatic system operates
on 10W40 motor oil. Transmission drive (oil) cooler for
increased system life.
Pumps Two variable displacement, axial-piston type.
Each Hydro-Gear BDP21 pump powers one
drive-wheel motor.
Pump Drive V-belt drive from engine crankshaft
Final Drive Direct-drive, high-torque wheel motors. One
White RC 26 motor for each drive wheel.
Filter 25 micron, spin-on type
Ground Speed Infinitely variable:
0-9 mph (0-14.48 kph) forward
0-5 mph (0-8.05 kph) reverse
Steering Twin-lever steering provides independent
control of each drive wheel. Speed, forward, reverse, brake,
and turns are all controlled with hand-operated controls
Turning Radius True zero degree. Turns within its own
length. Counter-rotating, independent drive wheels
Brakes Service: Hydrostatic dynamic braking.
Parking: Automotive-style drum brakes. When steering
levers are placed in neutral position, integral park brakes
are automatically engaged
Mower Drive Single V-belt drive from engine with elec
-
tric clutch. Spring tension idler for extended belt life.
Tires Front: 13 x 6.50 - 6, NHS semi-pneumatic, smooth
Drive: 24 x 12 - 12, Carlisle AT101 ATV bar-tread
Capacities
Fuel System: 12.2 US gal (46.18 l)
Hydraulic Oil: 2 US gal (7.57 l)
Dimensions Height: 71 in (180.34 cm)
W/60 in Deck
Length: 87 in (221 cm)
Overall width: 62 in (157.48 cm) w/discharge chute up
Tire-to-tire width: 59 in (149.86 cm)
Weight:1500 lbs (680.25 kg)
W/72 in Deck
Length: 87 in (221 cm)
Overall width: 70.5 in (179.07 cm) w/discharge chute up
Tire-to-tire width: 59 in (149.86 cm)
Weight: 1540 lbs (698.39 kg)
Safety Features Operator presence system connected to
deck and drive clutches. Stabilizer rollers at rear of tractor.
Seat belt. Certified ROPs with 4-post roll cage
Seat Molded-vinyl, suspension seat with armrests and
seat belt. Fore and aft adjustment
Construction Mainframe is 1.5 in x 3 in x .187 in (3.8 cm
x 7.62 cm x .47 cm) rectangular steel tubing. Drive motors
mounted to .179 in (.45 cm) welded steel. Front caster
wheels mounted with roller bearings on each wheel.
Front caster forks are .5 in (1.27 cm) steel
Deck Lift Foot-operated deck height adjustment. Pin for
setting height, detent for transport position
Controls Hand-operated choke/throttle, ignition switch,
electric mower clutch. Integrated parking brakes
Indicators Hour meter, engine warning light
Cup Holder Two cup holders molded into the left side
fuel tank. Accommodates nearly any cup size including
Big Gulp
Warranty Two year, bumper-to-bumper parts and labor
Lifetime warranty on tactor frame
Lifetime warranty on leading edge of the deck
Hydraulic hoses and fittings guaranteed to never leak
3-year warranty on front-caster fork bearings
3-year warranty on blade-spindle bearings
ATTACHMENTS
60” and 72” Side-Discharge Decks
Type Free-floating mower using three blades with center
blade to the front. Mower is suspended at the corners.
Includes 6 deck-mounted rollers to improve flotation in
rolling and uneven terrain.
Deck Lift Raise and lower deck from driver’s seat with
simple foot-operated deck-height adjustment. Pin for
setting height. Transport position. Change cutting heights,
hop curbs and trailer more easily.
Construction 125 in (.317 cm) welded steel. Solid 1 in
x .375 in (2.55 cm x .95 cm) steel bars reinforce impact
areas on trim edges. .187 in
x .375 in (.47 cm x .95 cm) in
box-section reinforced front edge. Reinforcements welded
onto spindle-mount areas. Steel deck housing is 5 in
(12.70 cm) deep for high-capacity mowing.
Cutting Heights Foot-operated deck height adjust
-
ment. Pin for setting height, detent for transport position.
Height adjustment in .25 in increments from 1 in
to 5 in
(2.55 cm
to 12.7 cm).
Mowing Blades Heavy-duty, high-lift, heat-treated steel
60 in: 21 in x 3.00 in x .25 in
72 in:
24 in x 3.00 in x .25 in
Blade Tip Speed
60 in: 18,350 fpm
72 in: 18,800 fpm
Blade Drive V-belt drive to all three spindles. Spring ten
-
sion idler pulleys
Spindles Machine ductile housing, 1 in (2.5 cm) diameter
high carbon steel shafts and sealed ball bearings
Flotation Suspended mower floats on four spring-
assisted chains. 6 anti-scalp wheels are standard
Discharge Chute Over-center design allows for chute
to be folded up for improved trailering or to pass thru
gates, etc
Width of Cut
60 in: 60 in (152.4 cm)
72 in: 69 in (175.26 cm)
Trim Capacity (left side)
60 in: 3.5 in (8.89 cm)
72 in: 8 in (20.32 cm)
ACCESSORIES
Mulch Kit Recycles clippings under deck allowing clip
-
pings to be cut and recut, then discharged down into the
grass. Reduces handling of clippings, improves appear
-
ance, and recycles nutrients back to the soil.
Specifications subject to change without notice.
Hustler has many State Contracts and our GSA Contract
Number is GSO7F-8756D
T H E H U S T L E R AT Z S P E C I F I C AT I O N S
Form No. 791624 9/03