GE 27951 Conference Phone User Manual


 



No dial tone
Check or repeat installation steps:
Make sure the base power cord is connected to a working
electrical outlet.
Make sure the telephone line cord is connected to the base
and the wall jack.
Connect another phone to the same jack. If it doesn’t work,
the problem might be your wiring or local service.
The handset may be out of range of the base. Move closer to
the base.
Make sure the battery is properly charged (for 1 hours).
Dial tone is ok, but can’t dial out
Make sure the type of phone service you are subscribed to is
TONE or PULSE, and that the unit is SET TO MATCH the dialing
mode.
Handset does not ring
Make sure the handset ringer is set to on.
The handset may be out of range of the base. Move closer to
the base.
You may have too many extension phones on your line. Try
unplugging some extensions.
Check for a dial tone. If no dial tone is heard, see “No dial
tone”.