Filter
Top Products
..
. ..
AM
— A Built-in ferrite rod antenna eliminates the need for
1
F, Antennas
an outside antenna for AM reception. Rotating the radio
●
slightly may improve reception for distant AM stations.
●
●
FM
— The POWER CORD acts as your FM antenna. The
●
●
POWER CORD picks up moderate to strong stations and
●
eliminates the need for an external antenna in most strong
●
●
signal areas, Be sure the POWER CORD is stretched out to s
its full length. Do not coil or bunch the CORD together.
●
Changing position of the POWER CORD may improve
●
●
reception.
●
●
●
●
Your D/GITAL CLOCK TIMER operates on a 24-hour cycle. s G. Time Set
The AM indicator to the left of the diaital disDlav will show
●
—..-
when the clock is. reading AM time. “ “‘ -‘
: cg?E:*m5P~z.wE:c-,.
.&
1. Press and hold TIME SET button.
● **
2. While holding the TIME SET button, press the HOUR and :
MINUTE buttons to change the display to the exact AM or s:
PM time.
*:
●
●
●
For a display of time in minutes and seconds;
s
H. Minutes and
1. Press and hold the WAKE SET button.
●
Seconds
2. While holding the WAKE SET button, momentarily press :
Time
the SLEEP button.
●
~ienl-mt
● The hour digits will display minutes.
●
u~aplay
“: 4=
—..
● The minute digits will display seconds and start to
~
increment.
:$
!
Release the
WAKE SET button to return to the hour and
● S*
●%
minute display.
●%
&
●
To Set The Wake Time, Select the AM or PM time that
s 1.
Wake Time
you want your radio or alarm to turn on automatically by
following the~ simple steps:
1. Turn the FUNCTION SELECTOR to OFF position.
2. While holding the WAKE SET button, press the HOUR and
MINUTE buttons to change the display to your desired AM
or PM wake-up time.
3. Release the
WAKE SET button and the current time is once
again displayed.
●
●
●
●
●
●
●
●
●
●
.. .
19