GE 2-971OA Telephone User Manual


 
TELEPHONE MEMORY OPERATION
When storing a number, a momentary delay may be needed in
the dialing sequence for a stored telephone number. This is
generally used when a “PAUSE” is needed to wait for a dial tone
(e.g. after dialing a long distance access number). The REO/AL
button should be pressed at the point where a pause is needed
in the dialing sequence. During storage, pushing the REDiAL
button sewes to store a pause in the dialing sequence as often
as needed.
Note: The REDiAL key will place a pause in the dialing sequence
anytime it is pres~ afier dialing a number. When storing PAUSE
in MEMORY, each PAUSE counts as one stored digit.
9
E. storinga
Pause in
Dialing
-—-
. .
: F. PABX and
MemoW and Redial may require the use of a “PAUSE” when .
initially-dialing or storing-outside numbers. The’ sequence, then, z
PBX Use
for dialing or storing an outside number would be, for exampIe: s
9 REDIAL 12345&
. .
..-
,. .
..:
. .
.,
..
. .
..
.-. >
,.,
~+
~:. .
,.
.. . . .
---
. .-.:
. . ... ..
‘. .
Hm to Change a Stoti Numhr
Rewat the storage sequena. me nw number will repla~ the old
number at the memo~ l-ion.
HW to Clear a Stoti Nu*r
Re~at the storage sequen=. Skip step 3 in the sequenm ~.e. do
not enter a telephone number). The storage Itiion will be blank
when ~uenm is mmpleted.
Hw to &M an Emr Mile Storing
Simp~ hang up and repeat the ptiure for stoting from the
beginning.
G. changing or
11