GE 25423 Intercom System User Manual


 
33
Editing a Name or Number Stored in Phone Book (Directory) Memory
1. Press the DIR button.
2. Use the Vol (+ or -) buttons to scroll up or down to the desired memory record.
3. Press the Sel/Save button and edit the content according to the steps in the
Storing a Name and Number in Memory section.
Editing a Name or Number Stored in the Intercom/Memory Log
(Memory Location)
1. Press the DIR button.
2. Press the Intercom/Memory Log button (1-16).
3. Press the Sel/Save button and edit the content according to the steps in the
Storing a Name and Number in Memory section.
Storing the Last Number Dialed
1. When the phone is idle, press the Redial/Format button.
2. Use the Vol (+ or -) buttons to scroll up or down to view the last six previously
dialed numbers.
3. While viewing the desired number, press the Sel/Save button twice.
4. Add the name as explained in the Storing A Name and Number in Memory section.
5. Press the Store button. ENTER LOCATION shows in the display.
6. Press the DIR button to store the redial number in the Phone Book memory or press an
Intercom/Memory Log button (1-16) to store the redial number in that memory
location.
Storing a Pause in Memory
Press the #Pause button twice to insert a pause in the dialing sequence of a stored
telephone number when a pause is needed (for example, when you must dial a 9 to get an
outside line or when you must enter codes to access your bank’s information line).
Dialing a Stored Number
1. Pick up the handset, or press Speaker to automatically select a line. Or press the line
you want to use.
2. Wait for a dial tone.
3. Press the Intercom/Memory Log button (1-16) for the person you want to call.
The number automatically dials.
OR
1. Press the DIR button.
Memory