Filter
Top Products
190-01134-12 Rev. D
Garmin GMA 350 Pilot’s Guide
24
GMA 350 Audio Panel
CLEARANCE RECORDER AND PLAYER
The GMA 350 contains a digital clearance recorder that records up to
2.5 minutes of the selected COM radio signal. Recorded COM audio is
stored in separate memory blocks. Once 2.5 minutes of recording time
have been reached, the recorder begins recording over the stored memory
blocks, starting from the oldest block.
Pressing the PLAY Key once plays the latest recorded memory block. The
Play function can also be accessed via Voice Recognition commands. Refer
to the ‘Voice Recognition’ section for more information.
Pressing the
MKR/MUTE
Key during play of a memory block stops play.
If a COM signal is detected during play of a recorded memory block, play
is halted.
Pressing the PLAY Key while audio is playing begins playing the previously
recorded memory block. Each subsequent press of the PLAY Key selects
the previously recorded memory block.
Powering off the unit automatically clears all recorded blocks.
Marker Mute Key
Stops Play
VOICE RECOGNITION
Voice Recognition allows the pilot (and optionally copilot) to control the
GMA 350 using spoken commands. To activate Voice Recognition, push
and hold the Push-to-Command (PTC) button while speaking a command.
When the Push-to-Command button is released, the GMA 350 will respond.
If a command is correctly interpreted by the GMA 350, a positive
acknowledgement chime will be played, and the pilot should verify that the
correct button selection is indicated by the triangular annunciator lights.
Alternatively, some commands will be indicated by a voice response from
the GMA 350. If the desired modes are not indicated by annunciator lights
or a voice response, the pilot should repeat the command by using the
Push-to-Command button, or by manually using the front panel controls
of the GMA 350.