Garmin 720 Two-Way Radio User Manual


 
GPSMAP 700 Series Owner’s Manual 41
Almanac, On-boat, and Environmental Data
Resetting Trip Gauges
1. From the Home screen, select  >  >  > .
2. Complete an action:
Select  to set all the readings for the present trip to 0.0.
Select  to set the maximum speed reading to 0.0.
Select  to set the odometer reading to 0.0.
Select  to set all the readings to 0.0.
Compass
Viewing the Compass
While you are navigating to a destination, the compass shows information about the distance you are off
course, the distance to your nal destination, the time to your next waypoint, and the distance to your next
waypoint.
From the Home screen, select >  > .
Environmental Data
Wind Gauges
Viewing Wind Gauges
From the Home screen, select >  > .
Selecting True or Apparent Wind for the Wind Gauges
The chartplotter must be connected to the peripheral devices listed below to capture the data shown on the
wind speed graph.
Wind Speed Description Required Sensors
Apparent Wind Shows wind speed data based on the ow of
air experienced while on a boat in motion.
A wind sensor.
True Wind Shows wind speed data based on the ow of
air experienced while on a stationary boat.
For the most-accurate data, the VMG Source
setting should be set to Auto (page 42).
A wind sensor and a water speed sensor; or a
wind sensor and a GPS antenna.
1. From the Home screen, select >  >  > .
2. Select  or .