Filter
Top Products
www.dell.com | support.dell.com
102 Getting Connected
4 On the Modem tab, tap New.
5 Enter a name for the connection, such as ISP Connection.
6 From the Select a modem list, select your modem type.
If your modem type does not appear, try reinserting the modem card.
If you are using an external modem that is connected to your device
with a cable, select Hayes Compatible on COM1.
NOTE: You should not need to change any settings in Advanced.
Most ISPs now use a dynamically assigned address.
7
If the ISP you are connecting to does not use a dynamically assigned
address, tap Advanced, tap the TCP/IP tab, and then enter the
address.
8 Ta p OK and tap Next.
9 Enter the access phone number and tap Next.
10 Select other appropriate options and tap Finish.
11 On the Dialing Locations tab, specify your current location and
phone type (most phone lines are tone). The settings will apply to all
connections you create.
When you open Inbox, Pocket Internet Explorer, or MSN Messenger, your
device automatically connects. Once you are connected, you can:
• Send and receive e-mail messages using Inbox. Before you can use
Inbox, you need to provide the information Inbox needs to
communicate with the e-mail server. See "Connecting Directly to an
E-Mail Server" on page 107 for more information.
• Visit web and WAP pages using Pocket Internet Explorer. For more
information, see "Using Microsoft
®
Pocket Internet Explorer" on
page 93.
• Send and receive instant messages with MSN Messenger. For more
information, see "MSN Messenger" on page 85.