Filter
Top Products
67
Auto Provision Setting
Field Name
Explanation
Current Config Version
Show the current config file’s version. If the version of
configuration downloaded is higher than this, the configuration will
be upgraded. If the endpoints confirm the configuration by the
Digest method, the configuration will not be upgraded unless it
differs from the current configuration.
Common Config
Version
Show the common config file’s version. If the configuration
downloaded and this configuration are the same, the auto provision
will stop. If the endpoints confirm the configuration by the Digest
method, the configuration will not be upgraded unless it differs from
the current configuration.
CPE Serial Number
Serial number of the phone
User
Username for configuration server. Used for FTP/HTTP/HTTPS.
If this is blank the phone will use anonymous.
Password
Password for configuration server. Used for FTP/HTTP/HTTPS.
Config Encryption Key
Encryption key for the configuration file
Common Config
Encryption Key
Encryption key for common configuration file
Save Autoprovision
Information
Save the Autoprovision username and password in the phone until
the server url changes
DHCP Option Settings
Field Name
Explanation
DHCP Option Setting
The phone supports configuration from Option 43, Option 66, or a
Custom DHCP option. It may also be disabled.
Custom DHCP Option
Custom option number. Must be from 128 to 254.
Plug and Play Settings
Enable PnP
If this is enabled, the phone will send SIP SUBSCRIBE messages to
a multicast address when it boots up. Any SIP server understanding
that message will reply with a SIP NOTIFY message containing the
Auto Provisioning Server URL where the phones can request their
configuration.
PnP Server
PnP Server Address