Filter
Top Products
56
Ring from Headset
If this is enabled and a headset is connected, ring tone will be played
in the headset.
Enable Intercom Mute
If enabled, mutes incoming calls during an intercom call
Enable Intercom Barge
If enabled, the phone will auto-answer an intercom call during an
outside call. If an intercom call is established, a second intercom
call will be rejected.
DND Return Code
Specify SIP Code returned for DND. Default is 480 - Temporarily
Not Available.
Busy Return Code
Specify SIP Code returned for Busy. Default is 486 – Busy Here.
Reject Return Code
Specify SIP Code returned for Rejected call. Default is 603 –
Decline.
Active URI Limit IP
IP address of the server for the Action URL messages described
below.
Push XML Server
IP address for XML server which can send display content to the
phone.
Enable Call Waiting
Tone
Enables audible notification of call waiting.
Action URL Settings
URL for various actions performed by the phone. These actions
are recorded and sent as xml files to the server. Sample format is
http://InternalServer /FileName.xml
Block Out Settings
Add or Delete Blocked numbers – Enter the prefix of numbers
which should not be dialed by the phone. For example, if 001 is
entered, the phone will not dial any numbers beginning with 001.
X and x are wildcards which match single digits. For example, if
4xxx or 4XXX is entered, the phone will not dial any 4 digit
numbers beginning with 4. It will dial numbers beginning with 4
which are longer or shorter than 4 digits.