Filter
Top Products
24
Example: A call is placed to 6625551212. Password is set to 662 and length is set to 3.
Display will show 662***1212.
1. Press Menu ->Features-> Enter->Passwd Dial-> Enter.
2. Use LEFT ARROW or RIGHT ARROW to enable the feature.
3. Use UP ARROW or DOWN ARROW to move to Prefix.
4. Use keypad to enter prefix.
5. Use UP ARROW or DOWN ARROW to move to Length.
6. Use keypad to enter Length.
7. Use BACK or EXIT to return to idle screen.
5.14 Pre Dial
If this feature is enabled, digits dialed on-hook will be transmitted when the phone goes
off-hook
Press Menu ->Features-> Pre Dial-> Enter.
6 Basic Setting
6.1 Keyboard
1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Keyboard->Enter.
2. There are four sets of keys which can be configured.
a) DSS Keys – Keys on the right side of the phone beside the Speakerphone button or
Line Keys.
b) Programmable Keys – Arrow keys and OK key
c) Desktop Long Pressed – Action to take when Programmable Key is pressed and
held.
d) Soft Key – Keys under the display
3. Use UP ARROW or DOWN ARROW and Enter to select the key.
4. Use LEFT ARROW or RIGHT ARROW to select the function.
5. Press OK to save.
6. Use BACK or EXIT to return to idle screen.
6.2 Screen Settings
1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Screen Settings->Enter.
2. The following items can be set.
a) Contrast – Set the contrast of the LCD.
b) Contrast Calibration – Set the level of contrast that the current contrast setting
provides.
c) Backlight – Enable or disable LCD backlight.
3. Press OK to save.
4. Use BACK or EXIT to return to idle screen.