Filter
Top Products
20
3. Press Edit
4. Use the navigation keys to enable voicemail.
5. Input the number. Press 2aB softkey if necessary to change the input method.
6. Press Save to save the change.
7. To hear a new voicemail, press the Voicemail softkey. Then press Dial. It may then be
necessary to enter a password.
4.8.4 Ping
1. Press Menu->Application->Ping->Enter.
2. Enter the IP Address to be pinged.
3. Press Start
4. Display will show “Ping IP Address”
5. After approximately 5 seconds, the display will show “OK” if the ping is successful or
“Failed” is the ping is unsuccessful.
4.9 Programmable Key Configuration
The phone has 12 programmable keys which can be set to various functions. The functions
are discussed in the following sections. The default configuration for each key is None
which means the key has not been set for any function.
To configure any function
1. Press Menu->Settings->Basic Settings->Keyboard->DSS Key Settings.
2. Choose Line Key Settings or Function Key Settings.
3. Use the UP ARROW or DOWN ARROW to choose the key.
4. Use LEFT ARROW or RIGHT ARROW to choose the function.
4.9.1 Memory Key
1. Use the UP ARROW or DOWN ARROW keys to move to Tel.
2. Enter the number to be stored.
3. Press SAVE.
4.9.2 Line
Access a SIP or IAX2 line registered to the phone.
1. Use the UP ARROW or DOWN ARROW keys to move to Line.
2. Use LEFT ARROW or RIGHT ARROW to select the Line.
3. Press SAVE.
4.9.3 Key Event
This subtype has many options. They are listed below along with brief explanations.
None