Filter
Top Products
27
5. When process is nished, handset display shows “Handset registered” briey, after
which it shows “Handset X” (X is the handset number).
De-register Handsets
You may need to do this if you need to replace a faulty handset. You will need to de-
register all handsets, then re-register each handset individually.
1. Press and hold <PAGE/FLASH> for 10 seconds, until display shows “De-register?”
(Display will show “Registering...” after approx. 4 seconds; keep pressing the button
until “De-register?” is displayed).
2. Press <OK/MENU> to conrm; display shows “Please wait” while de-registration
process is in progress.
Note:
Press <CLEAR/MUTE> to return to the previous menu at any time.
ANSWERING SYSTEM
Your phone includes a telephone answering machine that records unanswered calls when
it is on. The answering machine can store up to 59 messages within the maximum re-
cording time of approximately 25 minutes. As well as recording incoming messages, you
can record memos for other users of your phone. The base will also display “TAM FULL“.
Using the direct key
If the answering machine is turned off, the <ON/OFF ANSWER> Indicator will be
turned off if there are no new messages.
1. Press <ON/OFF ANSWER> to switch the answering machine on.
2. When the answering machine is switched on, the ON/OFF ANSWER Indicator will
be turned on.
Switch off the answering machine
If the answering machine is already switched on, in idle, press <ON/OFF ANSWER>
to switch the answering machine off. The answering system ON/OFF Indicator will be
turned off if there are no new messages.
Using the menu
Alternatively, you can switch the answering system ON or OFF using the Base menu.
1. Press <OK/MENU> and <UP/DOWN> to select Answering sys.
2. Press <OK/MENU> and <UP/DOWN> to go to Answer ON/OFF.
USING YOUR CORDED BASE