Filter
Top Products
25
4. Press <OK/MENU> to conrm; display briey shows “Saved”, then it returns to
previous menu
Set the Key Tone
The Key Tone is a conrmation beep when you press any key. It is set on by default, but
can be turned off, if desired.
In Idle:
1. Press <OK/MENU> and <UP/DOWN> to select Settings.
2. Press <OK/MENU> and <UP/DOWN> to select Key Tones.
3. Press <OK/MENU> and <UP/DOWN> to select On or Off.
4. Press <OK/MENU> to conrm; display briey shows “Saved”, then it returns to
previous menu.
Set the Home Area Code
In Idle:
1. Press <OK/MENU> and <UP/DOWN> to select Settings.
2. Press <OK/MENU> and <UP/DOWN> to select Home area code.
3. Use numeric keypad to enter your local 3-digit area code.
4. Press <OK/MENU> to conrm; display briey shows “Saved”, then it returns to
previous menu.
Set the Voicemail access number (in Speed Dial location “1”)
In Idle:
1. Press <OK/MENU> and <UP/DOWN> to select Settings.
2. Press <OK/MENU> and <UP/DOWN> to select Voicemail #.
3. Use numeric keypad to enter the Voicemail access phone number (separate service,
available from your local phone service provider).
4. Press <OK/MENU> to conrm; display briey shows “Saved”, then it returns to
previous menu.
Note:
You can now access your Voicemail service by press-and-holding key “1” on your
numeric keypad.
USING YOUR CORDED BASE