Filter
Top Products
21
4. Display shows “Entries in DIR” briey, then displays the rst entry in alphabetical
order; press <UP/DOWN> to select the desired entry to be deleted.
5. Press < X > and display shows “Delete contact?”.
6. Press <OK/MENU> to conrm or <CLEAR/MUTE> to cancel.
Assign Speed Dials
Your corded base has 9 speed dial available, corresponding to keys “0, 2-9” on your
numeric dial pad. When these speed dial locations are set up, you can dial these numbers
by press-and-holding the numeric key. For example – to dial the number set up in speed
dial 4, press and hold key “4” for 2 seconds. To set up the speed dial buttons, you must
rst add that number/contact to the directory.
In idle:
1. PRESS <OK/MENU>, THEN <UP> OR <DOWN> to select Directory;
press <OK/MENU> TO ENTER THE DIRECTORY MENU.
2. Press <UP/DOWN> to see Speed dial.
3. Display shows the rst speed dial location, 0; press <UP> OR <DOWN> TO
SEE ALL AVAILABLE LOCATIONS. THE AVAILABLE (NOT YET
SET) LOCATIONS WILL SHOW <UNASSIGNED>; THE SET LOCA-
TIONS WILL SHOW THE NAME OF THE CONTACT. PRESS <OK/
MENU> TO SELECT A SPEED DIAL LOCATION.
4. Display shows “Copy from DIR”, followed by the rst entry in your directory. Use
<UP> OR <DOWN> to select the entry you wish to assign to your speed dial
location; press <OK/MENU> TO SELECT THE ENTRY.
5. You can further edit this entry if needed; press <OK/MENU> to conrm.
6. You will hear a conrmation beep when nished, display returns to the Speed Dial list
of records.
Note:
You can reassign Speed Dial locations - follow steps above and choose the Speed Dial
you want to change; display shows “Reassigning SD”; press
<OK/MENU> to conrm.
Note:
Speed Dial “1” is reserved for Voicemail access (separate features, available from
your local phone service provider”. See section PHONE SETTINGS for setting up Voice-
mail speed dial and for directions on how to clear the voice mail icon.
USING YOUR CORDED BASE