Filter
Top Products
18
4. Enter the name; edit, then press <OK/MENU>to save; display shows “SAVED”,
then returns to Redial list.
Delete a redial number
1. Follow steps 1 and 2 in section Redial a number from the redial list.
2. Press < X > to delete; number will be deleted immediately.
Find the Handset
You can locate the handset by operation on the base station as below.
1. In idle mode, press <PAGE/FLASH> to page all handsets; “PAGING” will ash on
the base screen.
All handsets registered to the base will produce the paging tone and “PAGING”
ashes on the screen. You can stop the paging by pressing <TALK> / <SPEAKER-
PHONE> on any handset or <PAGE/FLASH> on the base to stop paging.
Make an Internal Call
This feature allows you to make internal calls and make conference calls.
Intercom
Using the corded base:
1. In idle mode, press <INT> and the number of the registered handset you wish to
call; press “<INT> 9” to call all cordless handsets.
2. The called handset rings, showing “Handset 7 is calling” (Handset 7 is the designated
name for the corded base). Press <TALK> on the called handset to establish the
internal call.
Note:
If only one cordless handset is registered to the base station, press <INT> will call
the cordless handset immediately.
Make a 3-way Conference Call
The conference call feature allows one external call to be shared with the corded base
and cordless handset or two cordless handsets. The three parties can share the conver-
sation and no network subscription is required.
Using the corded base during the external call: press TALK on a registered handset to join
the call.
Note:
Any party (corded base or cordless handset) hangs up during a conference call will
leave the other party still in connection with the external call.
USING YOUR CORDED BASE