Clarity E814CC Amplified Phone User Manual


 
15
MAKE AN EXTERNAL CALL
Preparatory dialing
Enter the phone number and lift up the corded handset or press <SPEAKER-
PHONE> to dial the number. Press <CLEAR/MUTE> to clear the entry when
entering the number.
Note:
To insert a pause in the dialling sequence, press and hold the <RD/P> button, the
screen will then show a “P” in the number.
Direct dialing
Lift up the corded handset or press <SPEAKERPHONE> to take the line and enter
the phone number.
Call from the directory
Press <UP> to access the Directory and press <UP/DOWN> to select the desired
directory entry. Lift up the corded handset or press <SPEAKERPHONE> to dial
out to the selected directory entry. Alternatively, press <OK/MENU> to access the
directory to get the desired directory entry.
Call from the CID
Press <DOWN> to access the CID and press <UP/DOWN> to select the desired
CID entry. Lift up the corded handset or press <SPEAKERPHONE> to dial out to
the selected CID entry. Alternatively, press <OK/MENU> to access the CID from the
main menu.
Note:
See sections on Caller Display and Settings for further details on CID.
Call from the redial list
Press <RD/P> to access the redial list and press <UP/DOWN> to select the desired
redial number. Lift up the corded handset or press <SPEAKERPHONE> to dial out
to the selected redial number.
Call timer
Your phone automatically times the duration of every call. The call timer will display a
few seconds after the call has made. It is shown in hours, minutes and seconds format
(HH:MM:SS).
USING YOUR CORDED BASE