Filter
Top Products
Installation and Configuration
Installing the Chassis
8
Cisco 4100 Series Wireless LAN Controllers - Installation and Configuration Guide
78-17155-01
The controller is shipped with rack-mounting ears attached, and rubber feet to mount in a separate bag.
Install the controller as follows:
• When you are mounting the controller on a desktop or shelf, adhere the rubber feet to the bottom of
the chassis, and place the chassis on any secure horizontal surface.
Note You can remove the rack mounting ears from the controller, if desired.
• When you are mounting the controller in an EIA-standard rack, attach the ears to the equipment rack
using the factory-supplied screws.
Note You can remove the rubber feet from the bottom of the controller, if desired.
You have installed the controller chassis.
Aviso
Somente uma equipe treinada e qualificada tem permissão para instalar, substituir ou dar
manutenção a este equipamento.
Advarsel
Kun uddannede personer må installere, udskifte komponenter i eller servicere dette
udstyr.