BT 2000 Cordless Telephone User Manual


 
11
Wall mounting
Your BT Quartet 2000 can be wall-mounted
using the screws and wall plugs provided.
Before you wall-mount your Quartet 2000
charger check that:
• The wall can support the weight of the
equipment.
• The position you choose leaves enough
space for the Charger and Handset to clear
any obstruction on the wall when the aerial
is extended.
• Your Additional Handset is within range of
the base unit and has a clear signal. For best
results, avoid mounting the Charger near
large metal objects and keep the number of
walls between the base unit and charger to
a minimum.
1 Using a pencil, mark two holes on the wall
48mm apart in the position you want to
mount your Charger.
2 Drill two holes suitable for the screws and
wall plugs supplied (if required).
3 Drive the screws into the wall, leaving
about 9mm free on which to hang the
Charger.
4 Remove the back panel of your Charger
as shown.
5 If it is more convenient, you can also turn
the back panel around and attach it to the
bottom of the charger.
6 Press the power cord into its guide groove
before you hook the unit over the screws.
7 Hook the holes on the back of the charger
over the screw heads.
To wall-mount the Quartet 2000
Charger