BlueAnt Wireless Sabertooth 3 Bluetooth Headset User Manual


 
BlueAntBlueAnt
Confirm language selection by
pressing the green button as
soon as your language is
spoken on the SUPERTOOTH 3.
Phonebook transfer will be initiated. Accept any
connection request on your phone if prompted.
Then wait until SUPERTOOTH 3 says:
BlueAnt ST3 ready, connected to phone.
“Voice Answer
Enabled”
Activation of Voice Answer:
Press VOL + for 5 seconds
until the SUPERTOOTH 3
confirms this mode.
5B
NOTE: Voice activation or deactivation is possible only if you’re not on call.
8
Voice Answer (if option is activated)
“OK”
After the BEEP, say clearly
one of the words below:
ACCEPT CALL
ACCEPT
ANSWER
OK
IMPORTANT: Voice answer will not work if you don’t wait for the BEEP.
Press the green button until
the LED will blinks red/blue.
The SUPERTOOTH 3 will then
ask you to pair your phone.
On your phone bluetooth
menu, search for
devices and select
BlueAnt ST3 then enter
0000 as pincode.
5A
4A 4B
“Voice Answer
Disabled”
Deactivation of Voice Answer:
Press VOL - for 5 seconds
until the SUPERTOOTH 3
confirms this mode.
Manual Answer
Press the green button
to answer incoming call.
End / Reject Call
Press the red button
to end or reject a call.
6 7
2 3
1) OPTION
2) Mark all
3) Option
4) Send or Send Business card
5) Via Bluetooth
6) Select BlueAnt ST3
Note: Blackberry and Smart phone owners please refer to
section F of user guide.
In case your phone doesn’t support automatic
transfer (dont press the red key of your
SUPERTOOTH 3), go to your phones
Contact Menu”, then select:
if available
First Time Turn ON
and Pairing
BlueAnt
BlueAnt
BlueAnt
BlueAnt
BlueAnt
BlueAnt
BlueAnt
1
Quick Start Guide
www.blueantwireless.com
“Call from John. (BEEP)”
The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by BlueAnt Wireless is under license.