Filter
Top Products
Making Calls
Click the button and wait for the Q1 to ask you
to “Say a Command”. Then say one of the voice
commands:
> Say Redial to redial the last number you called.
> Say Call Back to return the last call you received.
> Say Phone Commands to use phone voice dialling
(if your phone supports it).
> Say Call Speed Dial followed by 1 to 8.
Use your Voice
to Control the Q1
When you want to
do something:
1. Click the
button
and wait for the
Q1 to ask you to
“Say a Command”.
2. Say one of the
voice commands
loudly and clearly.
To learn the voice commands, say What Can I Say?
Let’s Get Started
1. Put the Q1 in your ear.
2. Hold down the
button until you hear
the welcome message
(about 3 seconds).
3. Follow the voice
prompts to pair the Q1
with your phone.
That’s it! You’re ready to go.
Tip: The code for the Q1 is 0000 (four zeros).
Quick Start Guide
English
Taking Calls
You can answer the call with your
voice: wait for the prompt to fi nish
and then say Answer or Ignore.
If you don’t want to wait for the
prompt, or you are in a noisy place:
> Click the
button once to accept the call.
> Double click the
button to reject the call.
To End a Call
Click the button.
WARNING: Prolonged use at high volumes can cause noise induced hearing loss.
Vol -
Vol +
button
(BlueAnt button)
Microphones
Main Voice Commands
> Am I Connected?
> Answer
> Call Back
> Call Information
> Call Speed Dial 1-8
> Cancel
> Check Battery
> Ignore
> Pair Me
Main Voice Commands
> Phone Commands
> Redial
> Settings Menu
> Switch Headset Off
> Teach Me
> What Can I Say?
Tip: Use the Teach Me command to learn about your
Q1, or say What Can I Say? to hear a list of all the
voice commands.
Pair
Me
Am I
Connected?
3
2
1
4
5
6
A2DP Audio Streaming
The Q1 supports A2DP audio streaming: if your
phone supports A2DP streaming you can play music,
podcasts or any other audio and it will automatically
be streamed to the Q1.
You can also use this feature to hear turn-by-turn
direction information from a GPS application on your
phone. Simply start the GPS application and the
audio will automatically transfer to your headset.
The audio will automatically pause if you make or
receive a phone call, and resume when the call ends.
7
Problems?
If you are having trouble, you can
reset the Q1 and start again:
1. Make sure the Q1
is on and is not
connected to any phones.
2. Click Vol +, Vol -
and the
button
together.
3. You will hear the welcome message.
Follow the voice prompts to
pair the Q1 with your phone.
Terms and Conditions
By using this product you are agreeing to BlueAnt’s terms and
conditions, available at www.blueantwireless.com.
In order to activate your full warranty coverage, please
register your product online at www.blueantwireless.com.
Warning: All BlueAnt headsets are designed to reach volumes
of up 100 decibels. Prolonged use at high volumes may affect
your hearing capacity. Using for extensive time periods may
result in noise induced hearing loss (NIHL).
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by BlueAnt Wireless is under license.
© 2009 BlueAnt Wireless. All Rights Reserved.
Help and Support
This guide is just to get you started with your Q1.
If you are having trouble getting the Q1 to work, visit
docs.blueantwireless.com to download the user
guide, which has full details of all the Q1’s features
and functions.
Please call us before returning the Q1 to a store and
we will help you through any diffi culty you may have.
> In North America call 1 866 891 3032.
> In other countries please see
www.blueantwireless.com for your local support
number.
Pairing Another Phone
The Q1 automatically
goes into pairing
mode the fi rst time
you switch it on.
You only need to pair your phone once, but if you
want to pair another phone later on, just say Pair Me.
> The Q1 can store pairing information for up to 8
Bluetooth
®
devices.
> Up to 2 devices can be connected at the same
time and you can answer whichever one rings
(multipoint).
In a Noisy Environment?
The Q1 has been designed to reduce background
noise and wind interference.
If you fi nd yourself in a very noisy or windy
environment, double click the
button during a
call to switch between standard and maximum noise
reduction settings.
Switching On and Off
To switch the
Q1 on or off
hold down
the
button
for about 3
seconds.
You can also switch
off using this voice
command:
Switch
Headset
Off
Charging
Your Q1 has been given an
initial charge to get started, but in future you need to
charge it for up to 2.5 hours.
If the
button fl ashes red when you switch the Q1
on, the battery is low. Use the supplied AC adaptor
and USB cable to charge the Q1.
> During charging, the
fl ashes red.
> When the light goes blue, the charge is complete.
> For safety reasons, the Q1 automatically turns off
during charging.
8
Upgrades
To enhance your experience, we are continually
improving the Q1 software.
From time to time we will make feature
enhancements available on our website for you to
download and apply to your Q1.
Go to q1.blueantwireless.com to get the latest
software for your Q1.
9
10
11
12
13
14
15