Filter
Top Products
32
Press PAUSE [3], to suspend countdown.
Press RESUME [3], to resume countdown if it was suspended.
Press CANCEL [4], to switch off the stopwatch.
Programmed number
This function allows dialing a pre-determined number by pressing any button
(except the CANCEL [4] and OFF [7] buttons).
1. With the telephone in the standby mode, press the MENU button [3].
2. By pressing the button [5], select the ADDITIONAL FUNCTIONS menu item,
after that press OK [3].
3. By pressing the button [5], select the QUICK DIAL menu item, then press OK
[3].
4. By pressing the or button [5], select ON.
5. Press the button [5].
6. By pressing the key buttons [8], enter the number.
7. Press OK [3] to confirm.
8. The LCD display [2] will show the Quick Dial inscription.
To cancel the programmed number
1. Press the CANCEL button [4].
2. The LCD display [2] will show the inscription Confirm? Press OK [3] to confirm.
Caller ID function
Your telephone supports this function. If this function is also supported by your
network operator, than the LCD display [2] will indicate the incoming caller’s num-
ber. If due to any reason the telephone failed to identify the number, then the LCD
display [2] will indicate Undetermined. If the incoming caller sets the number with-
held function, then the LCD display [2] will indicate Hidden.
SETTINGS
Clock setting
Every time you switch off your telephone or remove the rechargeable batteries,
the clock will be reset to 12:00 or to 00:00 (depending on the selected format).
1. With the telephone in the standby mode, press the MENU button [3].