Binatone XDC1520 Telephone User Manual


 
26
4. Press the Options button [3].
5. By pressing the button [5], select the DETAILS menu item, then press OK [3].
6. Press the Options button [3].
7. By pressing the button [5], select the ENTER menu item, then press OK [3].
8. For editing purposes you may use the buttons [8], the directional button [5] and
the DELETE button [4].
9. Press the Talk button [6] to make the call.
Service menu
This function allows storing up to 10 numbers of emergency departments and
services. The length of each entry shall not exceed 10 symbols and 20 figures.
To enter a number into the service menu
1. With the telephone in the standby mode, press the SER button [10].
2. By pressing the button [5], select the NEW ENTRY menu item, then press OK
[3].
Note: If the telephone’s memory is full, then the LCD display [2] will
indicate an appropriate inscription and the telephone will be
transferred onto the standby mode.
3. By pressing the buttons [8], enter the name. Then press the button [5].
Note: If the entered name already exists, then while storing it you may
replace the existing name or change the new one.
4. By pressing the buttons [8] enter the number.
Note: You may insert a pause anywhere in the number by pressing the
button [8] in the required location.
Anywhere in the number you may insert an instantaneous line disruption
(Flash). To do that, press the Options button, select the R menu item
and press OK.
5. Press the Options button [3].
6. By pressing the button [5], select the Save menu item, then press OK [3].
To view entries in the service menu
1. With the telephone in the standby mode, press the SER button [10].