Filter
Top Products
ENGLISH
11
Notes:
1. The handset you received with your package is already registered to your
base unit. This feature is needed when you want to register another
handset or when you have accidentally de-registered your handset.
2. Before registering a handset check that its battery is fully charged and that
it is located near the base unit.
3. You may additionally register handsets of any model made by any
manufacturer provided that such handsets are GAP-compatible. But
if you have registered a different brand handset, some of its additional
functions may be inoperable.
On the base unit:
Press and hold the handset locator button [12] until you hear a beep. This
means that the base unit has switched to the registration mode. The base unit will
continue working in this mode for 90 seconds, after that it returns to the normal
mode.
On the handset:
1. With the telephone in the standby mode press the MENU button [3].
2. By pressing the button [5] select the SYSTEM menu item, then press OK [3].
3. By pressing the button [5] select the REGISTRATION menu item, then press
OK [3].
4. By pressing the dialing buttons [8] enter the PIN-code (the factory default is
0000), then press OK [3].
Note: If the registration procedure is a success, the display will show the
handset name and number.
If the registration procedure failed, the handset’s number will not be shown
and the indicator which shows connection between the base unit and
the handset will start blinking. You then need to repeat the registration
procedure.
If you register a handset of a different manufacturer or model, look at the
registration instructions in the User’s manual of that handset.