Binatone 2020 Cordless Telephone User Manual

Open as PDF

of 2

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING

EMERGENCY TELEPHONE CALLS WHEN THE POWER

FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE

MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,

please read these instructions carefully.

USER GUIDE

Digital Cordless Telephone

CLEANING AND CARE

Do not clean any part of your Icarus 2020 system with benzene, thinner or

other solvent chemicals this

may cause permanent damage which is not

covered by the Guarantee.

When necessary, clean it with a damp cloth.

Keep your hot, humid conditions

or strong

sunlight,and don't let it get wet.

Every effort has been made to ensure high standards of reliability for your

However, if something

does go wrong, please

try to repair it yourself

consult your supplier or the Helpline.

do not

Icarus 2020 system away from

Icarus 2020 system

GUARANTEE AND SERVICE

The

purchase shown on your sales receipt. This guarantee

does not cover any

faults or defects caused by accidents,misuse, fair wear and tear, neglect,

faults on the telephone line, lightning, tampering with the equipment, or any

attempt at adjustment or repair other than through approved agents.

Please keep your sales (till) receipt this is your guarantee.

You should also keep the original packaging material.

In the unlikely event that you need to return your

Repair Centre while it is under guarantee, there will be a 5 handling charge.

While the unit is under Guarantee

1. Disconnect the base unit from the telephone line and the mains electricity

supply.

2. Pack up all parts of your

3. Return the unit to the shop where you bought it, making sure you take your

sales receipt.

After the Guarantee has expired

Remember to include the mains adapter.

3. Call Helpline on 0845 345 9677 (for UK only) and ask for a quotation of the

repair charge and details of where to send your I rus 2020 system for repair.

4. Make sure you include with your

5 Return your

If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair

under Guarantee. Then...

¾ Your name and address

¾ A cheque or postal order for the value of the repair

* This does not affect your statutory rights.

Department.

Icarus 2020 system is guaranteed for 12 months from the date of

Icarus 2020 system to our

Icarus 2020 system.

Icarus 2020 system to the address given by the Service

Icarus 2020 system , using the original packaging.

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

...........................................................4

INSTALLING YOUR PHONE

............................................................................5

2.1 CONNECTING THE BASE STATION..........................................................................5

2.2 INSTALLING AND CHARGING THE BATTERIES......................................................5

GETTING TO KNOW YOUR PHONE

................................................................6

3.1 HANDSET OVERVIEW ................................................................................................6

3.2 BASE STATION ...

3. DISPLAY ICONS AND SYMBOLS...............................................................................8

3. M

ENU STRUCTURE....................................................................................................

3. T

EXT AND DIGIT ENTRY TABLE................................................................................9

3.5.1

HARACTER SET ......................................................................................... 10

USING YOUR PHONE

......................................................................................1

4.1 MAKE A CALL .............................................................................................................1

4.1.1 PREPARATORY DIALING .........................................................................................1

4.1.2 DIRECT DIALING.......................................................................................................1

4.1.3 CALL FROM THE PHONEBOOK...............................................................................1 1

4.1.4 CALL FROM THE CALL LIST..................................................................................... 1

4.1.5 CALL FROM THE REDIAL LIST(ONLY AVAILABLE WITH CALLER DISPLAY) ...... 1

4.1.6

CALL TIMER ..............................................................................................................1

4.2

ANSWER A CALL .......................................................................................................1

4.3

END A CALL ................................................................................................................1

4.4

ADJUST EARPIECE VOLUME....................................................................................1

4.5 MUTE A CALL .............................................................................................................1

4.6 SET THE SILENT MODE .............................................................................................1

4.7 TURN ON THE KEYPAD LOCK...................................................................................1

4.8

REDIAL THE LAST NUMBER .....................................................................................1

4.8.1 REDIAL A NUMBER FROM THE REDIAL LIST.........................................................1

4.8.2 STORE A REDIAL NUMBER INTO THE PHONEBOOK............................................1

4.8.3

DELETE A REDIAL NUMBER....................................................................................1

4.8.4 DELETE THE ENTIRE REDIAL LIST.........................................................................1

4.9

HANDSET...................................................................................................1

4.10 MAKE AN INTERNAL CALL(FOR MULTI-HANDSET VERSIONS ONLY )................ .1

4.10.1

INTERCOM ANOTHER HANDSET..........................................................................1

4.10.2

CALL ALL HANDSETS.............................................................................................1

4.10.3

TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET................................1

4.10.4 MAKE A 3-WAY CONFERENCE CALL....................................................................1

PRIVATE PHONEBOOK..................................................................................1

5.3 VIEW A PHONEBOOK ENTRY ..................................................................................17

5.4 EDIT A PHONEBOOK ENTRY...................................................................................17

5.5

DELETE A PHONEBOOK ENTRY.............................................................................17

5.6 DELETE THE ENTIRE PRIVATE PHONEBOOK.......................................................17

5.7

CHECK THE PHONEBOOK USAGE .........................................................................17

CALLER DISPLAY (NETWORK DEPENDENT)

..............................................1

6.1 VIEW THE CALL LIST................................................................................................18

6.2

STORE A CALL LIST NUMBER INTO THE PHONEBOOK.......................................18

6.3

DELETE AN ENTRY IN THE CALL LIST...................................................................19

6.4 DELETE THE ENTIRE LIST OF THE CALL LIST......................................................19

6.5

VIEW THE DETAILS OF THE CALL LIST ENTRY ....................................................19

PHONE SETTINGS

..........................................................................................19

7.1

DATE AND TIME SETTINGS .....................................................................................19

7.1.1

CHANGE THE DATE FORMAT ................................................................................19

7.1.2 CHANGE THE TIME FORMAT .................................................................................19

7.1.3

SET THE TIME..........................................................................................................19

7.1.4

SET THE DATE......................................................................................................... 20

7.2

ALARM SETTINGS.....................................................................................................

7.2.1

TURN ON/OFF THE ALARM .................................................................................... 20

7.2.2 SET THE ALARM TIME ............................................................................................ 21

7.3

HANDSET SETTINGS ................................................................................................

7.3.1

SET THE RINGER RINGTONE FOR INTERNAL CALLS ........................................

7.3.2 SET THE RINGER MELODY FOR EXTERNAL CALLS ...........................................

7.3.3 SET THE RINGER VOLUME ....................................................................................

7.3.4 SET ALERT TONES..................................................................................................

7.3.5 SET THE HANDSET LANGUAGE ............................................................................

7.3.6 RENAME THE HANDSET.........................................................................................

7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE ..................................

7.3.8 SET THE AUTO ANSWER .......................................................................................

7.4 BASE SETTINGS ....................................................................................................... 22

5.1 ADD A NEW PHONEBOOK ENTRY..........................................................................15

5.2 SEARCH A PHONEBOOK ENTRY.............................................................................15

ANSWERING MACHINE

................................................................................ 25

8.1 TURN ON/OFF THE ANSWERING MACHINE .......................................................... 25

8.2 LISTEN TO THE MESSAGES IN THE ANSWERING MACHINE .............................26

8.3

DELETE ALL MESSAGES IN THE ANSWERING MACHINE ...................................27

8.4

RECORD MEMO ........................................................................................................27

8.5

ANSWERING MACHINE SETTINGS ......................................................................... 2

8.5.1

SET THE ANSWER MODE ...................................................................................... 28

8.5.2

SET THE OUTGOING MESSAGE (OGM) LANGUAGE (COUNTRY DEPENDENT)

................................................................................................................................. 28

8.5.3

RECORD YOUR OWN OUTGOING MESSAGE (OGM) ......................................... 28

8.5.4

PLAYBACK AND DELETE THE OUTGOING MESSAGE (OGM) ........................... 30

8.5.5

SET THE ANSWER DELAY .....................................................................................30

8.5.6 SET THE RECORDING TIME OF INCOMING MESSAGE ......................................

8.5.7

..................................................................................................

8.5.8 CHANGE THE COMPRESSION RATE .................................................................... 31

8.5.9 ACTIVATE REMOTE ACCESS ................................................................................ 31

TROUBLESHOOTING

..................................................................................3

DECLARATION OF CONFORMITY

............................................................. 3

CALL SCREENING

3.5.

2 PHLISH CHARACTER SET......................................................................................

NORWEGIAN CHARACTER SET............................................................................ 10

3.5. 11 4 GREEK CHARACTER SET.....................................................................................

LATIN C

7.4. D

E-REGISTER A HANDSET .................................................................................... 23

7.4. C

HANGE THE DIAL MODE ......................................................................................

7.4. C

HANGE THE FLASH (RECALL)TIME ....................................................................

7.4. CHANGE THE SYSTEM PIN CODE ........................................................................24

7.5

REGISTRATION ......................................................................................................... 24

7.6

RESET YOUR PHONE ............................................................................................... 25

FIND THE

1 IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of fire, electric shock and injury, including the

1) Read and understand all the instructions.

2) Follow all warnings and instructions marked on the product.

3) Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4) Do not use this product near water (for example, near a bath tub, kitchen

sink, swimming pool).

5) Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

6) Unplug this product from the wall outlet and refer servicing to our Repair

• When the power supply cord or plug is damaged or frayed.

• If the product does not operate normally by following the operating instructions.

• If the product has been dropped and the cabinet has been damaged.

• If the product exhibits a distinct change in performance.

7) Unless it is an emergency, avoid using the telephone during an electrical

storm.There may be a remote risk of electric shock from lightning.

8) Do not use the telephone to report a gas leak in the vicinity of the leak.

9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation

periods for the handsets are only applicable with the default battery capacities

10) The use of other battery types or non-rechargeable batteries/primary cells

can be dangerous. These may cause interference and/or damage to the unit

or surroundings. The manufacturer will not be held liable for damage arising

from such non-compliance.

11) Do not use third party charging bays. Damage may be caused to the batteries.

12) Please ensure the batteries are inserted in the correct polarity.

13) Dispose of batteries safely. Do not immerse them in water, burn them, or put

Package contents

The package contains the following items:

Single

• 1 Handset

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 2 rechargeable batteries

• 1 User manual

Twin

• 2 Handsets

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 4 rechargeable batteries

• 1 User manual

• 1 Charger pod with a connected

mains power adapter

them

where they could get

punctured.

Centre under the

following conditions:

following:

3.2 Base Station with Telephone Answering Machine (TAM) Control

1. PAGE

Press the Page on the base station to page your

2. CHARGING

CRADLE

3. CHARGING LED

Steadily on while the handset is charging.

4. TAM ON/OFF

Press to turn on the answering machine.

Press again to turn off the answering machine.

5. PLAY/STOP

Press to play the message

Press to stop the message playback

SKIP BACKWARD

Press to repeat playing the current message from the beginning.

Press twice to skip

SKIP FORWARD

Press to skip the current message and play the next message

VOLUME UP (+)

Increase (+) speaker volume during message playback

VOLUME DOWN (-)

Decrease (-) speaker volume during message playback

10. DELETE

Press once to delete the message during playback

Press and hold to delete all the messages

Note: New voice messages will not be deleted.

handset. It will ring for approximately

11.

7-SEG LED DISPLAY

- - When answering machine is OFF

00 Steadily ON: No voice messages in TAM

XX Flash: There are XX new voice messages received where XX is

from 01 to 59

Steadily ON: Playing the current XX incoming message

XX/FF Flashing XX alternatively with FF: There are XX new voice

messages received where XX is from 01 to 59 and the TAM

memory is full

Flashing FF only: TAM is full and only old voice messages are kept

the TAM memory

- - /XX Flashing XX alternatively with - -: Time is not set and there are XX

new voice messages received where XX is from 01 to 59

Flashing – only: Time is not set and there are only old voice

messages in the TAM memory.

YY Steadily ON: There are YY old voice messages (no new voice

messages).

A1/A2 Steadily ON: Playing the current outgoing message (OGM) where

A1,A2 are the OGM of Answer & Record and Answer Only mode

respectively.

XX/An Flashing XX alternatively with An: XX incoming message is now

recording.

LA Flashing: Remote access is in progress

LX Steadily ON: Indicate the current volume level where X is from 1 to 8

3.3 Display Icons and Symbols

The LCD display gives you information on the current status of the telephone.

Scroll up / down the menu items / Phonebook list / Redial list / Call List

Steady when the handset is in range of the base. Flashes when out of

Steady when an intercom call is in progress.

Flashes when there is an incoming internal call.

Indicates a call is in progress on that handset.

Indicates when the telephone answering machine (TAM ) is turned on.

Flashes when new TAM messages are received or the TAM messages

Indicates that the ringer is switched off.

Steady when an alarm is set. Flashes when the alarm is sounding.

Indicates that the keypad is locked.

Indicates when you have a new Voice Mail message.

(This is a Caller Display service and is not usually available from

range of the base or not registered to the base.

UK network providers.)

are full.

Indicates when the battery is fully charged.

Whole icon flashes when the battery performs charging.

Internal block icon flashes when the battery is in final charging stage.

Indicates when the battery needs charging.

Flashes when low battery power level is detected.

(BACK)

(INT)

Indicates when there are more characters or numbers in front of those

Indicates when there are more characters or numbers after those being

Press the MENU/OK key to access the main menu.

Press the MENU/OK key to confirm the current selection.

Indicates new TAM message / new call in TAM message list / call list.

Press the C/MUTE key to start an intercom call.

Press the C/MUTE key to go back to the previous menu level or cancel

Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute

being

displayed.

the current action.

the microphone during a call.

3.4 Menu Structure

In idle mode, press <MENU/OK> to access the Call List menu. Refer to the

following for the menu structure.

Main

CALL LIST

PHONEBOOK

SETTINGS

SETTIN

REGISTRATION

DEFAULT

ANS. MACHINE

Sub

Review Call

List Under

a selected

Call List

entry:

ADD TO PB

DELETE

DELETE ALL

DETAILS

Review

phonebook

listUnder a

phonebook

entry:

ADD

VIEW

EDIT

DELETE

DELETE ALL

PB STATUS

BS RINGER

RING VOLUME

DELETE HS

DIAL MODE

FLASH TIME

CHANGE PIN

ALARM

RING SETUP

TONE SETUP

LANGUAGE

RENAME HS

HS DISPLAY

AUTO ANSWER

DATE & TIME

PIN? - - - -

MSG PLAYBACK

DELETE ALL

MEMO

TAM ON/OFF

TAM SETTINGS

ANSWER MOD

TAM LANGUA

OGM SETTING

ANSWER DEL

RECORD TIME

REMOTE ACC

COMPRESSION

SCREENING

CHANGE

PIN? - - - -

Key Press

<MENU>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

3.5 Text and Digit Entry Table

The following table shows you where each letter and punctuation character can

be found, by using repeated presses of the alphanumeric keypad. This will be

helpful when storing a name in the

phonebook and renaming your handset.

In editing mode, a cursor is displayed to indicate the current text entry position.

It is positioned at the right of the last character entered.

Writing Tips:

1. Once a character is selected, the cursor will move to the next position after a

short pause.

2. You can move the cursor within the text with the <UP/DOWN> keys to

amend the text entry.

3. Press <C> to delete the last character.

4. Press and hold <C> to delete the entire text string.

3.5.1 Latin Character Set

Key

Press

1st 2

3rd 4th 5th 6th 7th 8th 9th 10th

1 space - 1 1

2 A B C 2 2

D E F 3 3

4 G H I 4 4

5 J K L 5 5

6 M N O 6 6

7 P Q R S 7 7

8 T U V 8 8

9 W X Y Z 9 9

0 0 0,or P (Pause) if press and hold

? / \

( ) *

# #

‘

Alphanumeric Editing

(For phonebook name editing and renaming handset )

Number Editing (For phone

number editing,date/time editing)

3.5.

Key

Press

1st 2

3rd 4th 5th 6th 7th 8th 9th 10th

1 SP - 1 1

2 A B C 2 2

D E F 3 3

4 G H I 4 4

5 J K L 5 5

6 M N O 6 6

7 P Q R S 7 7

8 T U V 8 8

9 W X Y Z 9 9

0 0 0, P (Pause)

# #

Alphanumeric Editing

(For phonebook name editing and renaming handset)

Number Editing (For phone

editing, date/time editing)

Key

Press

1st 2

3rd 4th 5th 6th 7th 8th 9th 10th

1 SP - 1 1

D E F 3 3

4 G H I 4 4

5 J K L 5 5

6 M N O 6 6

7 P Q R S 7 7

8 T U V 8 8

9 W X Y Z 9 9

0 0 0, P (Pause)

# #

Alphanumeric Editing

(For phonebook name editing and renaming handset)

Number Editing (For phone

editing, date/time editing)

Polish Character Set

3.5.3

Norwegian Character Set

Key

2 A

Æ B C 2

Key

Press

1st 2

3rd 4th 5th 6th 7th 8th 9th 10th

1 SP - 1 1

2 A B 2 2

E 3 3

4 H I 4 4

5 K 5 5

6 6 6

7 7 7

8 8 8

9 9 9

0 0 0, P (Pause)

# #

Alphanumeric Editing

(For phonebook name editing and renaming handset)

Number Editing (For phone

editing, date/time editing)

Δ Ζ

Λ Μ

Ν Ξ Ο

Π Ρ Σ

Τ Υ Φ

Χ Ψ Ω

3.5.4

Greek Character Set

4 USING YOUR PHONE

4.1 Make a Call

4.1.1 Preparatory Dialing

Enter the phone number and press <TALK ON> / <SPEAKER PHONE> to

connect to the line and dial the number. When entering the number, if you

make a mistake, press <C> to delete digits.

4.1.2 Direct Dialing

Press <TALK ON> / <SPEAKER PHONE> to connect to the line and then

4.1.3 Call from the phonebook

Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to

Press <TALK ON> / <SPEAKER PHONE> to dial out the selected phonebook entry.

(Note: if you enter a wrong digit you cannot correct it with the <C> key.)

Note: You can also access the phonebook by pressing <MENU/OK>, <DOWN>,

<MENU/OK>.

select the desired phonebook entry.

4.1.4 Call from the Call List (only available with Caller Display)

Press <UP> to access the Call List and press <UP/DOWN> to select the desired

Press <TALK ON>/ <SPEAKER PHONE> to dial out the selected Call List entry.

Note: You can also access the Call List by pressing <MENU/OK> twice.

4.1.5 Call from the redial list

Press <DOWN> to access the redial list and press <UP/DOWN> to select the

Note: The alphanumeric keys provide a short-cut to find entries beginning with

the corresponding letters.

Call List entry.

desired redial number.

Press <TALK ON> / <SPEAKER PHONE> to dial out the selected redial number.

Note: You can also access the Redial List by pressing the <REDIAL> key.

enter the phone number.

4.1.6 Call timer

Your handset automatically times the duration of every call.

The call timer is displayed 15 seconds after dialling, and remains on the screen

for 5 seconds after the end of the call.It is shown in hours, minutes and seconds

4.2 Answer a Call

If the handset is not on the charging cradle:

When the phone rings, press <TALK ON> / <SPEAKER PHONE> to answer a call.

Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or

charger will answer the call automatically, and no buttons need to be

format (HH:MM:SS).

pressed.

4.3 End a Call

During a call press <TALK OFF> to end the call.

Put the handset on the base station or charger to end the call.

4.4 Adjust Volume

There are 5 levels (VOLUME 1 to VOLUME 5) to choose the earpiece or

During a call:

Press <UP/DOWN> to select volume 1-5. The current setting is shown.

When you end the call, the setting will remain at the last selected level.

4.5 Mute a Call

You can talk to someone nearby without letting the caller hear you during a call.

During a call:

Press <C> to mute the microphone and “MUTED” will display on the LCD.

Your caller cannot hear you. Press <C> again to unmute the microphone.

4.6 Set the Silent Mode

In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER

OFF”

speakerphone volume.

icon is displayed on the LCD.

Note: The display will still flash the Call icon and show CALL or the Caller Display

number, when there is an incoming call, even if the ringer is turned off.

To turn the ringer back on, press and hold <HASH/#> again.

4.7 Turn on the Keypad Lock

In idle, press and hold <STAR/*> to turn on the keypad lock. The “KEYPAD

4.8 Redial the last number

You can redial any of the 5 last numbers called. If you have stored a name in

the phonebook to go with the number, the name will be displayed instead.

4.8.1 Redial a Number from the Redial List

1. In idle mode, press <DOWN> to access the redial list.

Note: If the redial list entry shows a name, press <Hash/#> to view the number

2. Press <UP/DOWN> to browse the redial list.

3. Press <TALK ON> / <SPEAKER PHONE> to dial to the selected redial number.

Note: If there are no numbers in the redial list, the display shows

“

EMPTY

”

4.8.2 Store a Redial Number into the Phonebook

1. Follow Steps 1 and 2 in section 4.8.1

2. Press <MENU> and <UP/DOWN> to select ADD TO PB.

3. Press <OK> and then enter the name you want to use in the phonebook.

4. Press <OK> and then modify the number, if necessary.

5. Press <OK> to show <MELODY 1>.

6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will

be played when browsing the ringtone list. (Note: the selected melody will

7. Press <OK> to confirm, and the entry will be stored.

Note: You can still use <TALK ON> / <SPEAKER PHONE>to answer a call when

To turn the keypad lock off, press and hold <STAR/*> again.

only be played if you subscribe to Caller Display and the incoming number

icon is displayed on the LCD.

The most recent last number will display at the top of the redial list.

of this entry.

matches the

stored number.)

4.8.3 Delete a Redial Number

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE.

3. Press

<OK> to confirm, and the entry will be deleted.

4.8.4

Delete the Entire Redial List

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE ALL

3. Press <OK> to display <CONFIRM?>.

4. Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

LOCK”

the handset is ringing.

4.9 Find the Handset

You can locate the handset by pressing <PAGE> on the base station. All the

handsets registered to the base will produce the paging tone and show

<TALK OFF> /<C> on any handset or <PAGE> on the base again.

Note: If there is an incoming call during paging, the phone will ring with the

4.10 Make an Internal Call (For Multi-handset Versions Only)

This feature is only applicable when there are at least two registered handsets

It allows you to make internal calls, transfer external calls from one handset to

incoming call instead of paging.

"PAGING" on the display. You can stop the paging by pressing <TALKON>/

another handset and make conference calls. If the called handset is not in

answered with 60 seconds, the called handset will stop ringing and the calling

Note: If only one handset is registered to the base station, when <C/MUTE/INT>

is pressed, it will display “NOT POSSIBLE”

4.10.1 Intercom Another Handset

1. In idle mode, press <C/MUTE/INT>

and all the other registered handset

2. Enter the number of the handset that you want to call, or enter "9" to call all

3. The called handset rings and <TALK ON> / <SPEAKER PHONE> must be

Note: If only two handsets are registered to the base station, pressing

<C/MUTE/INT> will call the other handset immediately.

numbers will display, along with a "9".

to establish the intercom call.

4.10.3 Transfer an External Call to another handset

During an external call:

1. Press <MENU> and <UP/DOWN> to select INTERCOM

2. Press <OK> to show all the other registered handset numbers, plus "9".

3. The external call is put on hold automatically and the called handset rings

4. Press <TALK ON> / <SPEAKER PHONE> on the called handset to establish

Enter the number for the handset you

want to transfer the call to.

handset will return to

standby mode.

handsets.

5. Press <TALK OFF> on the calling handset or put the calling handset on the

charging cradle to end the current call with the external party.

6. The external call is transferred to the called handset.

4.10.2 Call All Handsets

1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.

2. Press <KEY 9> to ring to all registered handsets

pressed on that handset

an internal call. the

4.10.4 Make a 3

way Conference Call

The conference call feature allows one external call to be shared with two

handsets (in intercom).

The three parties can share the conversation and no additional network

subscription is required.

During an external call:

Follow Steps 1 to 4 in section 4.10.3.

2. Press and hold <STAR> on the calling handset to establish the conference call

Either handset can exit the conference by pressing <TALK OFF>, leaving the

other handset still connected to the

external call.

5 PRIVATE PHONEBOOK

Each handset can store up to 20 private phonebook entries with names and

numbers. Each phonebook entry can have a maximum of 20 digits for the

phone number and 12 characters for the name. You can also select different

ringtones for your phonebook entries. (Note: the different ringtones only play if

5.1 Add a New Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

Press <MENU> and <UP/DOWN> to select PHONEBOOK and then press

<OK> to access the phonebook.

2. Press <MENU> to show ADD.

3. Press <OK> and then enter the name.

4. Press <OK> and then enter the number.

5. Press <OK> and <UP/DOWN> to select the desired ringtone for your

6. Press <OK> to store the phonebook entry.

you subscribe to Caller Display and

the incoming number matches the stored

number.) Phonebook entries are stored alphabetically by name.

phonebook entry.

5.2 Search a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Enter the first letter of the name using the alphanumeric keys, and then

<UP/DOWN> to scroll to the entry you

want.

Remote operation

Using a tone-dialling phone, dial your home number

You can also use the codes on the other side of this card

While your outgoing message is playing, press

Key in your remote security code

The default code is 0000. For details of how to set a new code,

see the User Guide 8.5.9.1 of page 31.

Note: Press <*> key after OGM playback cannot access your answering machine

remotely. If the 4-digit Remote Access PIN is entered incorrectly three times

consecutively, the line will be released automatically.

Note: If your answering machine is switched off, the phone will enter into

the remote access mode after 10 rings.

You can then enter the 4-digit remote access PIN

(Default Remote Access PIN is 0000) to activate the remote access feature.

Icarus 2020 system

1 2 3 4

10876

In a home with broadband, every telephone must have a micro-filter connected,

not just the one at the telephone point that your modem is connected to.

If you need more broadband micro-filters, contact your broadband supplier.

3 GETTING TO KNOW YOUR PHONE

3.1 Handset Overview

The maximum range between the base station and the handset is approximately

300 meters. Depending on the surrounding conditions as well as spatial and

struct ural factors, the range may be reduced.

2 INSTALLING YOUR PHONE

2.1 Connecting the base station

1) Plug the power supply

& line cord into

2) Plug the power adapter into a 230Vac,

3) Always use the cables provided in the box

Warning: Use only the provided adaptor, using

other power supplies may cause a hazard.

Warning: The power adaptor should be installed

and the line cord into your telephone line socket.

the base station.

50Hz mains socket,

The range indoors is normally less than outdoors, typically being up to 50 meters.

near the equipment and should be easily accessible.

Triple

• 3 Handsets

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 6 rechargeable batteries

• 1 User manual

• 2 Charger pods with

connected mains

power adapters

• 4 Handsets

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

•

• 1 User manual

• 3 Charger pods with

connected

mains power adapters

Quad

2.2 Installing and charging the batteries

1) Place the 2 batteries as indicated, ensuring their

2) Slide the battery compartment cover back.

3) Put the handset on the base and charge for

15 hours first time. A beep indicates that the handse

polarity is correct.

is properly placed on the base or cha

rger.

If you have a

Broadband line

If you connect your telephone to a line with

insert a micro-filter between the telephone

and the telephone line, otherwise you may get

interference between the telephone and the broadband,

which could cause problems.

a broadband connection, you will need to

Use only NiMH rechargeable batteries.

rechargeable batteries

WITH TELEPHONE ANSWERING MACHINE(TAM)CONTROL

RECALL(also called FLASH)

In idle / predialing mode:

Press to insert a recall

During a call:Press to dial

a recall

TALK ON

In idle / predialing mode:

Press to make a call

In Redial list / Call List /

Phonebookentry:

Press to make a call to the

selected entry in the list

During ringing:

Press to answer a call

LEFT SOFT KEY(MENU/OK)

In idle mode:Press

to access the main menu

In sub-menu mode:

Press to confirm the selection

During a call: Press to access

Intercom/Phonebook/ Redial

List/ Call List

TALK OFF

During a call: Press to end a call and go

back to idle screen

In menu / editing mode: Press to go back

to previous menu

In idle mode:

Press and hold to power off the handset

In idle mode (when the handset is powered

off): Press and hold to power

DOWN

In idle mode:Press to access the redial list

In menu mode:

Press to scroll down the menu items

In Phonebook list / Redial list / Call List:

Press to scroll down the list

During a call:

Press to decrease the earpiece volume

During ringing:

Press to decrease the ringer volume

In idle mode:

Press to access the call list

In menu mode:

Press to scroll up the menu items

In Phonebook list / Redial list /

Call List:

Press to scroll up the list

During a call:

Press to increase the

earpiece volume

During ringing:

Press to increase the ringer volume

RIGHT SOFT KEY(CLEAR/BACK/MUTE/INTERCOM)

n main menu mode: Press to go back to idle screen

In sub-menu mode: Press to go back to previous level

In sub-menu mode: Press and hold to go back to idle screen

In editing / predialing mode: Press to clear a character / digi

In editing / predialing mode:

Press and hold to delete all the characters / digits

During a call: Press to mute/ unmute the microphone

In idle mode:Press to intercom another handset

SPEAKERPHONE

During a call:

Press to turn on / off the speakerphone.

Call List / Phonebook entry :

Press to make a call with speakerphone

During ringing:

Press to answer a call with speakerphone

During answering machine message playback /

call screening:

Press to play message via speaker

7.4.

SET THE BASE RINGER MELODY .....................................................

SET THE RINGER VOLUME ....................................................................................

12.

IN USE LED

Steadily ON: During a call

Flashing: During ringing or new TAM message is received.

VOLUME

...................... 22

Icarus 2020 system

Top Automotive Device Types

Top Automotive Brands

Top Baby Care Device Types

Top Baby Care Brands

Top Car Audio & Video Device Types

Top Car Audio & Video Brands

Top Cellphone Device Types

Top Cellphone Brands

Top Communications Device Types

Top Communications Brands

Top Computer Device Types

Top Computer Brands

Top Fitness Device Types

Top Fitness Brands

Top Home Audio Device Types

Top Home Audio Brands

Top Household Appliance Device Types

Top Household Appliance Brands

Top Kitchen Appliance Device Types

Top Kitchen Appliance Brands

Top Laundry Appliance Device Types

Top Laundry Appliance Brands

Top Lawn & Garden Device Types

Top Lawn & Garden Brands

Top Marine Equipment Device Types

Top Marine Equipment Brands

Top Musical Instrument Device Types

Top Musical Instrument Brands

Top Outdoor Cooking Device Types

Top Outdoor Cooking Brands

Top Personal Care Device Types

Top Personal Care Brands

Top Photography Device Types

Top Photography Brands

Top Portable Media Device Types

Top Portable Media Brands

Top Power Tools Device Types

Top Power Tools Brands

Top TV and Video Device Types

Top TV and Video Brands

Top Videogame Device Types

Top Videogame Brands

Binatone 2020 Cordless Telephone User Manual